厂家供应可人牌J52-1氯化橡胶面漆

特性：氯化橡胶面漆漆膜附着力好、坚韧、具有良好的耐候性、耐水性、耐酸碱性、耐盐雾、防霉等性能。氯化橡胶厚浆面漆采用高压无空气喷涂可以达到厚膜涂层效果，不仅缩短了涂装周期和降低涂装成本，也提高了漆膜的防腐蚀性能。

Feature：Chlorinatedrubber paint has good adhesion, tough, good weather resistance, waterresistance, acid and alkali resistance, salt spray, mildew and other properties. Chlorinated rubber thick paint can achieve thick-filmcoating effect with high-pressure airless spray.技术指标Technical indicators：项目

Item指标

Indicators颜 色

Color各色

Every color闪点（℃）

Flash point38干燥时间

（25℃）h

Drying time表干

Set to touch≤2实干

Completely dry≤12理论涂布率（g/m2）

Theoretical spreading rate(g/m2)135-190干膜厚度（μm）

Thickness of dry film(μm)35-70施工参考Construction Reference：

1、涂装间隔时间Coating interval：温度

Temperature

0℃20℃30℃***短间隔

The shortest interval24小时

24hours8小时

8hours6小时

6hours***长间隔

The longest interval不限

Unlimited2、前道配套用漆：氯化橡胶铝粉防锈漆、淡铝红氯化橡胶厚浆底漆、环氧云铁灰厚浆底漆、环氧铁红底漆。The matching coatings: Aluminumrust chlorinated rubber, chlorinated rubber red light thick aluminum primer,epoxy primer thick gray cloud of iron, iron oxide red epoxy primer.

3、涂装方法：刷涂、滚涂、喷涂均可。

Method: Brush, roller, spray are all permitted.

安全 SAFETY

请注意包装标签上的安全事项。此外, 还应遵守有关国家或当地政府规定的安全法规。避免吸入溶剂蒸汽或漆雾, 皮肤、眼睛不得接触本品。在狭窄处或空气不流通处施工, 必须提供强力通风。尽管通风条件良好也应配戴防护用具。

Packings are provided withapplicable safety labels which should be observed. In addition, national orlocal regulations should be followed. As a general rule, inhalation of solventvapours or paint mist, and contact of liquid paint with skin and eyes, shouldbe avoided. Forced ventilation should be provided when applying paint in confinedspaces or stagnant air. Even when ventilation is provided, respiratory, skinand eye protection are always recommended when spraying paint.

特别注意：Special Notice:

本说明书有关数据是在标准条件下取得，实际使用时，环境条件可能与之略有不同，以上数据如有改变，以本公司说明书为准，恕不另行通知。