厂家供应G04-9过氯乙烯面漆

技术指标Technical indicators：项目

Item指标

Indicators颜色

Color各色

Colorways外观

Appreance漆膜平整

Smooth粘度（涂—4号杯/25℃）S

Viscosity (Tu-4 cup/25℃) s 25~70遮盖力（g/m2)

Hiding power20-100固体含量（%）

Solid content红色、蓝色、黑色

Red, blue, black26其他颜色

others31干燥时间（min）

Drying time表干

Set to touch20实干

Completely dry90硬度（摆杆）

Hardness (pendulum)≥0.4光泽（%）

Gloss≥80柔韧性（mm）

Flexibility1湿膜厚度（μm）

Wet20~25 干膜厚度（μm）

Dry10~15施工参考：1、为单组分漆，适宜喷涂。It is one-component paintwhich is suitable for spraying.2、在相对湿度较大的情况下，需加过氯乙烯防潮剂，以防漆膜发白。In case of relative humiditybeing large, vinylperchloride moisture proof agent should be added in toavoid the film becoming white.3、施工中遇黏度过厚，可加G型稀释剂调整。When the viscosity is too thick, G-diluent can be addedto adjust.4、在未实干的情况下，防止重压。When the film is notcompletely dry, press is prohibition.5、附着力相对较差，对表面处理要求比较高。

The adhesion is relatively poor. Has high requirement of surfacepreparation.

安全 SAFETY

请注意包装标签上的安全事项。此外, 还应遵守有关国家或当地政府规定的安全法规。避免吸入溶剂蒸汽或漆雾, 皮肤、眼睛不得接触本品。在狭窄处或空气不流通处施工, 必须提供强力通风。尽管通风条件良好也应配戴防护用具。

Packings are provided withapplicable safety labels which should be observed. In addition, national orlocal regulations should be followed. As a general rule, inhalation of solventvapours or paint mist, and contact of liquid paint with skin and eyes, shouldbe avoided. Forced ventilation should be provided when applying paint inconfined spaces or stagnant air. Even when ventilation is provided,respiratory, skin and eye protection are always recommended when sprayingpaint.

特别注意：Special Notice:

本说明书有关数据是在标准条件下取得，实际使用时，环境条件可能与之略有不同，以上数据如有改变，以本公司说明书为准，恕不另行通知。