泽诚自动化ZDAS101锂电池叠片机/叠垛机

一、概要Summary

本装置主要适用于动力电池的Z字形叠片工艺，采用凸轮控制保正隔膜恒张力控制，极片采用二次定位保证叠片精度达到0.5mm以内。采用叠片与包扎分开方式，有效的提高产品的性价比。The device is mainly applied to the battery of Z shape stacking process, the control of cam are membrane constant tension control, pole piece by two positioning to ensure accuracy of less than 0.5mm stacking. The stacking and bandaging apart, effectively improve the cost-effective products

二、设备技术参数 Equipment technical parameters

机器规格Machine specifications

项目Project ZSC01A

技术参数

Technical parameters

叠片速度Stack velocity 1片/S 极片与隔膜间对位精度Pole piece between the diaphragm and the alignment precision 中心偏差小于0.5mm(纵向)

Center deviation is less than0.5mm ( vertical) 隔膜间对位精度The diaphragm between the alignment precision 端面对齐偏差小于0.5mm

Face alignment deviation less than0.5mm

单片对齐精度Monolithic alignment accuracy ±0.2mm; 极片整体对齐精度Pole piece overall alignment precision ±0.5mm 夹具宽度可调范围Fixture width adjustable range ±10mm（可调） 辅助时间Auxiliary time（S） 15-25 装一次极片工作时间Loaded with a pole piece work time（h） 0.5 叠片数量Stack number 可设定Can be set 自动下料Automatic feeding 传送带送出The conveyor belt 叠片方式Sheet stacked modes 交流伺服电机AC servo motor 真空吸附Vacuum adsorption 特制真空吸盘Special vacuum sucker

总功率Total power（kw) 6.3 加热部分功率Heating power（kw) 1.2 正常运行功率Normal running power

（kw) 3

三、能源介质medium energy

3.1电源power supply

1》电压 AC220V±10％ 単相 瞬时变动《0.5s以下》1%以下。voltage AC220V + 10% order phase instantaneous change"0.5s"1%

2》频率frequency 50Hz±1Hz

3》容量capacity 5kVA《220V》

3．2空气air

1》压力pressure 0．5Mpa《5kgf/cm2》

2》容量volume 1001/min