供应美国lightsmyth标准反射光栅

3. Standard Reflection Gratings （标准反射光栅） Reflection gratings are used in a variety of optical applications requiring spatial separation of light by wavelength. LightSmyth’s ultra-low scatter reflection gratings are fabricated using projection lithography and reactive-ion-etch of single-crystal-silicon substrates. Gratings may be coated by a variety of metallic and dielectric materials and optimized for your application using our highly accurate coating simulation software and state-of-the-art coating facility. Groove depth and duty cycle are optimized to maximize first order diffraction achieving up to 95% peak absolute diffraction efficiency.

Each grating is a master, not a replica, resulting in low-scatter and long-lasting performance. Yet the volume fabrication processes allow us to offer prices below that of common replicated gratings. The silicon substrate provide thermal conductivity approaching that of copper and thermal expansion lower than Pyrex making it an ideal general substrate material and in a class by itself in high temperature or power applications. Sub-millimeter substrate thicknesses make these gratings ultra-light and enable device miniaturization.

Importantly, LightSmyth reflection gratings reduce scattered light up to 100X compared to conventional commercial replicated holographic gratings and mechanically ruled gratings (see plot at right). Advantages: Each grating is a high-performance master, no polymers used. Very low cost (lower than prices of replicated gratings). Free of replication/ruling flaws; ultra-low scatter. Robust single crystal silicon substrate. Copper-like thermal conductivity. Bests Pyrex glass in minimizing thermal expansion.Applications: Remote Optical Sensors and Spectroscopy High power lasers Spectral beam combining Astronomy and Space explorationList of Standard Reflection Gratings

Typical grating thickness is approximately 0.7 mm. Substrate height and width tolerance is ± 0.3 mm. Grating substrate: single crystal silicon. Grating coating: aluminum. Custom coatings optimized for your particular application are available as an option.

Line Density

(lines/mm) λPE 1 Size Part number 1200 580 nm (s), 1 �m to 1.55 �m (p) 12.5 mm × 12.5 mm SLG-C12-1212A-Al 1200 580 nm (s), 1 �m to 1.55 �m (p) 25 mm × 25 mm SLG-C12-2525A-Al 1200 580 nm (s), 1 �m to 1.55 �m (p) 50 mm × 30 mm 2 SLG-C12-5030A-Al 1800 390 nm (s), 660 nm to 1.0 �m (p) 20 mm × 9 mm 2 SLG-C18-2009A-Al 2400 300 nm (s),430 nm to 780 nm(p) 12.5 mm × 12.5 mm SLG-C24-1212A-Al 3600 240 nm (s), 480 nm (p) 12.5 mm × 12.5 mm SLG-C36-1212A-Al List of X-ray and Extreme UV Gratings

Ultra-high line density gratings offered by LightSmyth enables very high efficiency and low scatter diffraction for X-ray and EUV wavelength regions. Gratings are suitable for in-plane and off-axis mounts. Typical grating thickness is approximately 0.73 mm. Substrate height and width tolerance is ± 0.3 mm. Grating substrate: single crystal silicon. Grating coating: gold with seed layer of chromium. Custom coatings optimized for your particular application are available as an option.

Line Density

(lines/mm) Groove depth Size Part number 7200 50 nm 12.5 mm × 12.5 mm SLG-C72-1212A-Au 7200 50 nm 25 mm × 25 mm SLG-C72-2525A-Au 7200 50 nm 50 mm × 50 mm SLG-C72-5050A-Au Custom low scatter diffraction gratings

LightSmyth offers custom diffraction gratings with the following attributes: Aluminum, gold or silver reflective coatings, MgF2, Al2O3 or silica enhancing overcoat. up to 12-inch diameter substrates up to 7200 lines/mm line density variable duty cycle line widths as thin as 70 nm groove aspect ratio up to 1:4 nm.Our optical engineers will gladly assist with your custom application.