自动行进钢板坡口机

GBM-20型自动行进式钢板坡口机 GBM-20 automatic moving steel plate beveling machine GBM-20型钢板坡口机是一款适用于厚板的重负荷加工型机器，此机型的行走速度为每分钟1.2~1.6米。可在厚度9~50毫米以下，材料抗拉强度为40kg/mm2钢板上一次自动行进加工出坡面宽度20毫米的焊接坡口，根据实际需要分数次可加工到坡面28毫米宽度。坡口角度可在25度-45度范围内任意调节，当坡口机安装到平板边缘后，机器自动沿板边行走，不需要操作者做任何干涉，是一款综合性能较为完善的坡口设备。 GBM-20 plate beveling machine is a heavy load for thick plate processing machines, this type of travel speed of 1.2 ~ 1.6m/min. In thickness from 9 to 50mm below the tensile strength steel plate for the 40kg/mm2 an automatic processing of the slope the road width of 20 mm beveling, according to the actual needs of the fractional width of 28 mm can be processed to the slope. Beveling angle of 25 degrees -45 degrees in the context of arbitrary regulation, when the beveling to the flat edge of the installation, themachine automatically walk along the edge, without any operator intervention, is a comprehensive performance more perfect beveling Equipment.参数：电机功率Motor Power……………………………………………………….…………………..3.0KW电机电压Motor voltage……………………………………………………………………………380V电机转速Motor speed……………………………………………………………………….1450r/min坡口行进速度Beveling speed……………………………………………………………1.2~1.6 m/min一次坡口宽度Maximum width…………………………………………………………………20mm坡口角度（更换角度轮）beveling angle……………………….. 25 º~45º坡口钢板厚度plate thickness……………………………………………………………….9~50mm钢板最窄宽度The narrowest width of the plate………………………………………….….55mm机器净重weight…………………………………………………………………….…….……..370kg1:一次坡口推荐加工量 Recommended processing volume of a beveling 2：机器图片 Machine photo 3：机器作业图片 Machine operating photo