自动行进坡口机

GBM-12A型自动行进式钢板坡口机 GBM-12A automatic moving steel plate beveling machine

GBM-12A型自动行进钢板坡口机以每分钟1.5-2.5米的速度，可在厚度50毫米以下，材料抗拉强度为40kg/mm2钢板上一次自动行进加工出坡面宽度12毫米的焊接坡口，根据实际需要分数次可加工到坡面18毫米宽度。通过更换角度器附件可以得到从25°、30°、35°、40°、45°五个标准坡口角度。也可以通过更换附件为稍短尺寸的圆管进行坡口。是一款综合性能较好的坡口设备。

GBM-12A automatic moving plate groove machine 1.5-2.5 m/min speed, 50mm in thickness below the tensile strength steel plate for the 40kg/mm2 processed on an automatic road width of 12 mm of the weld slope slope Mouth, according to the actual needs of the fractional width of 18 mm can be processed to the slope. Accessories by changing the angle can be from 25 °, 30 °, 35 °, 40 °, 45 ° bevel angle of the five standards. The appendix can also be shorter by changing the size of the pipe beveling. Overall performance is a good beveling device.参数：电机功率Motor Power……………………………………………………….…………………..2.2KW电机电压Motor voltage……………………………………………………………………………380V电机转速Motor speed……………………………………………………………………….1450r/min坡口行进速度beveling speed……………………………………………………………1.5~2.5m/min坡口宽度Maximum width…………………………………………………………………12mm坡口角度（更换角度轮）beveling angle………………………..

25º；30 º；35 º；40º；45º坡口钢板厚度plate thickness……………………………………………………………….6-50mm钢板最窄宽度The narrowest width of the plate………………………………………….….55mm圆管坡口最小直径Minimum diameter tube beveling………………………………….…..Ø110mm机器净重weight…………………………………………………………………….…….……..105kg1：一次坡口推荐加工量

Recommended processing volume of a beveling2：机器图片

Machine photo

3：机器作业图片 Machine operating photo

4：钢板坡口效果图片

Effect of image