德国德奥特 各种类型涂层复合机 热熔涂层机，平板复合机，平板层压机

DOTCOAT – THERMOPLAST ADHESIVE SYSTEMS 德奥特－热塑性粘合系统

POWDER SCATTERING 热塑性粘合系统

FLAT BED LAMINATION 平板复合

3

上海代表处联系方式：张先生，137 6133 5365 dotcoat@126.com

A rotating, structured roller is filled with thermoplastic

powder. Depending of the required

coating weight, the rotation speed is adjusted.

Right after, an oscillating brush empties the

roller and this way, the volumetrically dosed

powder falls onto the substrate passing

underneath.

一个结构化的转动的棍子装有热塑性粉沫。

根据涂层克重的不同，棍子转速是可以调整

的。然后，一根震荡刷清空这根棍子，这样

粉末洒落在下方经过的基布上。

In order to coat or laminate various substrates, the

material is transported between two belts through a

heating section. This way, the thermoplastic adhesive,

applied before the machine in form of powder, webs

or films is melted. Most often, the heating section is

followed by a calandering unit and a cooling section.

This way, the liquified adhesvie is squeezed into the

surfaces where it solidificates by cooling and thus

glues the substrates together.

为了涂布或复合多种基材，材料被两条皮带运输通过

一个热区，这些热塑粘合剂在进入机器前通常是粉沫

状，网状或胶片状。通常在热区后跟一个压光单元和

冷却区。粘合在些被挤进基材表面并冷却固化，从而

使基材粘合在一起。