HDMI矩阵4X4 四进四出带音频切换分配器 3D 1080P 工厂正品 低价

FEATURES

lFour HDMI input signals switched or split to two HDMI sink devices

lEachof the HDMI outputs is withaudio output by SPDIF or 3.5mm Stereo Audio.

l Support 3D

lWith HDMI-CEC function.

lSupport deep color 30bit, 36bit

lSupport Blue-Ray 24/50/60fs/HD-DVD/xvYCC

lDigital audio format, as DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD

lSupport signal retiming

lSupport input up to 15metres AWG26 HDMI standard cable length,

output up to 25metres AWG26 cable length

lInputs can be switched with the IR remote control，also can be controlled by two buttons.

lBy remote the optical audio output format can be switched to Stereo Sound or DTS-HD/Dobby-trueHD/LPCM7.1/DTS/DOLBY-AC3/DSD. The HIFI audio format is decided by the sorce film.

lIt can smartly jump over those input sources which are not connected.

lit can come back to the default the input 1 status when restarted or reset.

lLED Indicate: when one source device or sink display device is working, the LED relative will come to light; when one source is selected to any sink,the LED relative to the source will come to light.

lNo loss of quality

lInstalls in minutes

lNeed DC5V/2A power supply

Figure1.2rear panel showing picture

DC/5V :5V DC-DC Power interface

INPUT2- INPUT4:HDMI input interface

Operating and Connecting：

1.Connect one cable from each HDMI source devices into HDMI Matrix inputs.

2.Connect one cable from each display (monitor or projector) into the HDMI Matrix

outputs.

3. Connect audio output SPDIF or COAX with stereo Equipment.

4. Use the RMT-IR remote control port to remotely switch between sources.

5 .Connect 5V power supply to the HDMI 4x4 Matrix.