同轴与光纤音源互相转换器 光纤转同轴，同轴转光纤

同轴光纤相互转换同轴转光纤，光纤转同轴

支持96Khz采样频率 支持各种数字环绕声格式，包括杜比、DTS、AC-3 光纤头采用防尘自动门设计，方便使用。

超薄型设计，方便携带。

输入端子：方口光纤x1 RCA同轴x1

输入电平：0.5Vp.p/75

输出端子：方头光纤x1 RCA同轴x1

输出电平：0.5Vp.p/75

支持采样频率：32kHz；44.1kHz；48kHz； 96kHz

电源：6V 300mA

特色 ：

•支援同軸與光纖雙向轉換

•支援2聲道至5.1聲道

•支援S/PDIF聲音放大與距離延伸

•體積小，容易安裝

Digital Audio Converter

User Manual

Thank you for purchasing this product.For optimum performance and safely,please read these instructions carefully before connecting,operating or adjusting this product.Please keep this manual for future reference.

Introduction:

You can Plug your Toslink Digital Audio in and get Coax Digital Optical Out. This can transforms a digital Toslink (S/PDIF) audio signal to a Digital Coax signal. This Toslink to Coaxial converter will allow you to connect the Toslink digital audio output from your DVD, cable or satellite receiver to a Coaxial digital input.

You can Plug your Digital Audio Coax in and get Toslink Digital Optical Out. This can transforms a digital RCA Coaxial (S/PDIF) audio signal to a Digital Toslink Optical signal. This coaxial to optical converter will allow you to connect the coaxial digital audio output from your DVD, cable or satellite receiver to a Toslink digital optical input.

This product will NOT convert ANALOG AUDIO (typically Left & Right - Red and White RCA audio to the Digital Audio Format

Easy Installation:

This audio splitter works with all digital audio device such as HDTV, Blue-ray DVD player, HD cable box, PS3 , HD receivers, home theater systems and all other HD devices. It is all plug and play. Simply plug the power supply, connect the optical toslink(Coax) cable between the optical(Coax) audio source/the end receiving devices and the setup is all done.

Technical Data:

Used 24-bit audio DSP,96KHz Digital receivers,and 192 KHz/24bit ADC.supports all S/PDIF digital audio transmission for uncompressed PCM, LPCM, Dolby AC-3, Dolby 5.1, Dolby Digital and DTS sound.1. Power Supply DC/6V 300mA,(outlay 100V~240V broadband convert DC6V Power)2. Dimension: 102*40*20mm

Package and Accessory:Prodects NameQuantityRemarksDigital Audio Converter1 unit DC6V Power Adapter1 unitAC 100~240V/50~60HZUser Manual1 unitEN

Product Interface Schematic

Power ---------------------------Power LED lights

DC 6V----------------------------Power input

OPT IN-------------------------- Optical Digital Input via Toslink

COX OUT------------------------ Coaxial Digital Output via RCA jack

COX IN-------------------------- Coaxial Digital Input via RCA jack

OPT OUT------------------------ Optical Digital Output via Toslink

Failure Check:1. No sound outputA. Check whether the power Optical Audio Splitter power is on or notB. Check whether the input channels and output connectionsC. Make sure the output device (PS3/XBOX360/DVD Player /HD Player)is set to digital audio output.D. Make sure digital amplifier power on, and switch to digital audio input,turn on the volume.2. NoiseA. Make sure the cable is goodB. Are there unusual audio inputC. Check this noise is weather from digital amplifier or headphones.