A 欢迎订购 供应2500T冷压机

1. 本机适用于装饰板、胶合板、细木工板厂预压工序；

2. 总体结构设计采用国际先进技术，结合新工世要求，精心设计制造；

3. 液压系统及电路均经过精密试验，活动横梁无自落现象，确保品质卓越；

4. 液压缸采用特殊超硬材料，柱塞硬度达HRC55以上，密封采用低阴力阶梯圈，无漏油，使用寿命长，保养成本低；

5. 进出料机构采用链条传动，对板坯无损伤，特推荐于装饰板生产线。

1. The machine is used for Pre-pressing process of making plywood, blockboard and decorative board.

2. The whole structure is designed and manufactured elaborately based on advanced international experience and new technological requirements.

3. The electric system and hydraulic system of the machine have been examined precisely and the free-beam will not fall by its own gravity with results assuring excellent quality.4. The cylinders are made of super-hard metal(plunger hardness above HRC55),and sealed with low-resistance stepped gaskets,giving no oil-leakage,long service life and low maintenance cost.

5. Chain transmission is adopted for the feeding and discharging mechanisms,causing no damage to the plate bland,and thus it is recommended for the production line of decorative veneer boards.基本参数MAJOR TECHNICAL PARAMERS序号

ITEM N0名称

DESCRIPTION单位

UNIT规格

SPECIFICATION备注

REMARKS01幅面尺 PLATEN DIMENSION(mm×mm)2700×1400 02公称总压力 NOMINAL GROSS PRESSURE(Tons)450 03额定油压 NORMAL OIL PRESSURE(Mpa)28 04主油缸 MAIN CYLINDER(mm)ф410×1420 05副油缸 MINOR CYLINDER(mm)ф80×950 06工作间距 OPENING LIMIT(mm)300－1200 07油缸行程 STROKE OF CYLINDER(mm)1350 08动 力液压站电机 HYDRAULIC CENTER MOTOR(kw×p)7.5×6 POWER 输送电机 TRANSFERRING MOTOR(kw×p)2.2×6 09外形尺寸 OVERALL DIMENSIONS(mmL×mmW×mmH)3860×2200×4900 10净重 NET WEIGHT(Tons)16.5