沈阳利德盛机械有限公司
主营产品:
2023年08月09日 08:08
型号 |
LDDC-10 |
外形尺寸 |
500*500*800(mm)mm(mm) |
用途 |
压铸,东芝压铸机,镁合金压铸 |
重量 |
0.03(t)kg |
品牌/型号 |
利德盛/LDDC-10 |
别名 |
压铸模温机 |
电动机功率 |
18(kw) |
模温机技术说明
Specification- Hot water temperature Machine
1.目的:Purpose这份技术资料用于为艾默生公司获取一份控制Die Cast温度的模温机的报价单 With this technique data, we want to get a quotation to buy Hot water temperature machineFor EMERSON设备控制Die Cast模具型腔温控范围为120+/-15℃The inside of die cast will be controlled by this equipment at around220+/-15degree
2.适用范围:
Range
本机器应适用于马达二号线东芝压铸机(350T)The machine should be suitable for Die Cast of Toshiba with 350T in line 2
3.数量:
Quantity一台.One Pcs
.
4.设备动作及操作要求:
Machine/equipment motion and operation requirement
动作:
Motion
· 启动开始按钮,执行对Die Cast预热Open the start button for Die Cast warmer at specified time· 停机Stop the machine
5.机器设备要求:
Machine/equipment requirement
温控范围:
Ranger of temperature control· 在机器周期时间不超过60秒的前提下,Die Cast模具型腔温控制范围为220+/-15℃
导热媒体
Heat transferring medium· 传热媒体必须为水或者油Heat transferring medium must be water or oil.
换机回油/回水功能
Oil/water can go back when transferring new model· 油泵反抽回油/回水功能Return oil/water back suction from the pump.
冷却水,循环水配管
Cooling&Circulating water pipework· 冷却水,循环水配管口径应和Die Cast上模具接头相对应;Cooling and Circulating water pipework should be consistent to that of Die Cast
控制系统:
Control system· 控制柜内元件布局合理.配线整洁,动力线与信号线要分开且信号线要使用屏蔽线.机壳接地良好.柜内要安装散热风扇及散热孔In electrical enclosure, there must be a logical unit distribution and trimness wiring. And separate the power wires from the signal wires. The signal wires
must be shield and the earth wire must be connect to earth well. There must be fan and ventilation orifice around the cover.· 在控制柜顶部安装LED报警灯塔,(自动绿灯暂停黄灯维修红灯)Install LED alarm light tower on the top of the control enclosure.
(1, green light means running; 2, yellow light means pause; 3, red light means maintenance or error.)· 控制箱的位置安装在适于操作的地方.急停按钮应装于操作员轻易按到的位置The control box position must be installed where to operate easily. And the operator can push the E-Stop button easily.油加热器为大型热油温控设备,主要特点是在较低的运行压力下可获得常温至350℃,泵浦流量大,加热功率高。广泛使用于石油化工,塑料橡胶工业的压延、密炼、硫化,纺织印染工业的热定型、烘干,印刷工业的复合、覆膜,非织造来的压延加热等。本公司为专业油加热器生产厂家,引进德国先进的技术,优化系统设计,为客户提供低价优质的控温设备。超高温系列机型代表我公司在温度控制技术上精益求精和不断创新的精神,该系列产品的水温机已达到180度,油温机达到350度。其中超高温油温机,,使客户降低设备成本,创造更好的经济效益。
油加热器;油温控制器;热油温控设备产品性能及特点
1电脑触摸式控制,操作简单易懂。
2日本进口微电脑双组P.I.D温度控制表,触摸式内储、自动演算,省电百分之35以上。
3安全保护及故障指示系统完善。
4进口高级组件,使用年限长。
5升降温速度快,温度精确稳定。
6独特的双功率加热设计,适合不同温控场所使用,节能效果明显。
7不锈钢一体成型,管损小,加热均匀。
8开机自动排气功能。
9模具回油温度检测表。
联系方式