XKC系列粗碎机

【XKC系列粗碎机简介】

用途:主要用于废旧轮胎的粗碎.

结构特点:

辊筒采用合金冷硬铸铁,表面坚硬耐磨,前后辊均为沟槽辊,内腔加工,使辊面温度均匀.

机器设有过载保护装置,保护主要零件不因过载而损坏.机器设有紧急制动,当发生紧急事故时,拉动拉杆,机器立即制动,安全可靠。

采用手动调节辊筒间距,操作方便。

传动采用NGW行星齿轮减速器,结构紧凑,传动效率高,噪音低,使用寿命长.机器采用整体底板,安装方便。

本机分左,右传动,使用单位在订货时候要明确,没有提出要求按右传动订货。

本机采用圆网筛旋转送料,对大块胶料进行反复粉碎。

【CRINGING MILL】Applications:

For grinding of waste rubber.

Features:

The roll are made of chilled alloy cast iron with wear-resisant hard sureface.

The are fluted rolls and have bored cavities.so they can be cooled hornogeneusly.

The protection decice is provided to protect the main parts from damage due

to overload.

The reverse current plugging system in provided above the rolls.in case of

emergency.the safely rod is pulled down and the rolls will be stopped

immediately.gency,the safely rod is pulled down and the rolls will be stopped

imediately.

The roll gap can be easily adjusted by handweel.

The mill is designed with NWG planetary gear reducer which is of long service

life.low noise,samll volume and high driver efficiency.

The bed-plate of the machine is integral.The machine can be installed very easily.

The left drivers abd right driver are available.Please specify the driver way in

order.If no requirement is requested,the right driver machine is supplied.

Rubber is converyed through the rotation of round screen.Large peices of rubber

can be ground repeatedly.