宁波万时达贸易有限公司
主营产品:
2023年12月18日 13:55
牌号 |
PP |
NATPET® products, marketed under the trade name Teldene®, are intended for the use by those customers and/or any other consumers, who undertake to e responsible to independently establish on their own
the appropriateness of the product for its intended use, covering all safety and legally enacted requirements at the location of its projected use and the legal disposal practices thereof. The description of the product as
given in this sheet shall under no circumstances be construed as warranty, express or implied including a warranty of merchandize fitness for a particular purpose. On behalf of NATPET, no one is authorized to make
any such warranties, or take up on their own to assume such a liability. In case of product related claims, the sole and maximum remedy will be the physical substitution of the product or reimbursement of the purchase
value, as per NATPET’s options. Further claims based on consequential, secondary, castigatory, or extraordinary damages will in no way entertained by NATPET.
NATPET would like to advise its customers and other users that unless specifically stated the supplied products should not be used for applications in medical and/or pharmaceutical sectors.
NP-TSS-TDS-30A
Product Datasheet
Teldene R40MLT
Polypropylene
Random Copolymer
Basell licensed Spheripol Process
TYPICAL APPLICATIONS
Suitable for high clarity injection molding and injection-stretch blow molding applications.
Used for the production of Housewares and Clear Containers.
KEY CHARACTERISTICS
Excellent Processability and flow-ability.
Excellent Transparency.
Good Impact Resistance.
Food contact approval for specific applications (refer to NATPET)
PROCESSING METHOD
Injection Molding
QUALITATIVE
Test Conditions Method Value Unit
Basic
Density ISO 1183 0.900 g/cm3
Melt Flow Rate (MFR) 230°C/2.16 kg ISO 1133 40 g/10-min
Mechanical
Flexural Modulus 1-mm/min ISO 178 1,000 MPa
Tensile Stress at Yield 50-mm/min ISO 527 28.0 MPa
Tensile Strain at Break ISO 527 12 %
Notched Izod Impact Strength 23 °C ISO 180/1A 6 kJ/m2
Thermal
Deflection Temperature Under Load 0.45 Mpa ISO 75 90 °C
Optical
Haze 1.0 mm ASTM D 1003 6.0 %
Note: The above are typical data representing the product; not to be construed as analysis certificate or specifications
For further details about NATPET and its products, please visit the website
联系方式