供应PVC造粒机组

SJΦ90-Φ130径挤出主机（手动换网）

SJΦ90-Φ130 Granule Extruder Mainframe(Hydraulic net changing) SJΦ130/Φ150TPR挤出主机

SJΦ130/Φ150TPRExtruder Mainframe SJΦ65-Φ130径挤出主机（液压换网）

SJΦ65-Φ130 Granule Extruder Mainframe (Manual net changing) Φ600/750/850径旋风桶

Φ600/750/850 Cooling System 一、概述

风冷造粒是塑料工业中不可缺少的一道工序（例PVC、TPR材料等），经挤出机口模挤出的物料热切后直接掉入风冷系统冷却定型，具有颗粒均匀、圆滑等优点。我公司生产的风冷造粒机组性能稳定，可快速更换网具和刀具，性能稳定、低噪音、高效率等特点，深得广大客户信赖。

Air Cooling Plastic Pelletizing is an indispensable process in plastic industry (PVC,TPR materials etc).The mainframe adds heat and pressure on materials to make them in flowing state.After that, materials will be cut after extrusion through the mould head, finished granules are even and smooth.Our Plastic Pelletizing Machineries are stabie in performance and able to replace net and knives rapidly. What's more, it has the excellence of low-noise and high-effiiency.Therefore,it is of highly popularity and gains trust by the majority of clients.

二、流程：

原料或废旧回收料（原料+添加剂）--挤出主机（塑炼、排气、挤出成连续圆柱条）--切粒装置（切粒、鼓风机送出）--旋风桶（冷却定形、去作粉尘）--鼓风机--旋风桶（再次冷却、除尘）--捏和机（混合、分散、添加）--成品出

The production procedure:

Raw materials or 2nd hand materials(raw materials+additives)-Extruder Mainframe (Plasticizing,extruding into consecutive columned strips-Cutter (cutting wind blast sends out )-Whirlwind Cooler (cooling, forming and dedustiong)-Wind Blast Machine-Cooling System (second cooling,forming and dedustiong)-Blender (Mixing,dispersing and adding)-Finished products.

三、主要技术参数: 螺杆直径 ф65-ф130 中心高度 95-125mm 螺杆转速 30-80r/min 产量 5-250kg/h 螺 距 45-130mn 热耗功率 7.5-45kw 长径比 12-32 驱动功率 3-45kw 压缩比 2.5-4.5 总功率 8-90kw