廊坊市翰华石油设备有限公司
主营产品:
2023年11月24日 10:59
制式 |
英制 |
型号 |
JN |
特性 |
普通 |
最小扭矩 |
19 |
最大扭矩 |
42980 |
精度 |
+ / - 3% |
Our "PATENTED" JN-Series hydraulic wrench was designed specifically for Fast, Safe and Accurate tightening or loosening of Gas Compressor Piston Rod Crosshead Jam Nuts. However, with use of one of our innovative, in-house specialty adapters, the wrench can be used to turn any nut that faces the problem of having a shaft, rod or tube running through the center of it. The Torq/Lite® JN-Series hydraulic wrench features a PATENTED "split-head" design, enabling the tool to fit over any pipe or rod and around your nut. Our standard JN-Series hydraulic wrench features three different tools with capacities ranging from 100 to 32,000 foot pounds of torque using a standard bi-directional 10,000 p.s.i. hydraulic pump.
PATENTED "Split-Head" Design - The "Split Head" itself, or through use of a special made adapter, can fit any size or type of OEM Jam Nut, hexed nut or any other nut configuration. This eliminates the need for expensive after market nuts while also giving you never before Accuracy, Speed and Safety!!!Fast - The PATENTED "Split Head" design can be placed around the wash pipe, piston rod or any other type of shaft, rod, pipe or tube and on the nut or adapter in less than one minute. Accurate tightening or loosening of the nut is easily achieved in just a few seconds.Safe - The JN-Series hydraulic wrench eliminates unsafe hammer wrenches, hydraulic jacks or cranes, and other unsafe equipment currently being used to turn these nuts.Accurate - This fast hydraulic wrench, originally designed specifically to deal with Crosshead Jam Nuts, provides accuracy to ± 3% with the use of a standard advance hold and retract 10,000 p.s.i. air powered hydraulic pump.Functional - The JN-Series hydraulic wrench will work equally well in compressor crosshead access ports or any nut that has a shaft, rod or tube running through the middle of it. It will work right-side up or upside-down, sideways, etc…for both loosening and tightening.Reaction Pad - Reacts against the Compressor crosshead structure or any other solid and flat surface.Coated - All exposed parts to resist corrosion.360° Swivel Fittings (Patented) - Allow hose movement without hose binding. Stainless steel with fewer moving parts - a great improvement over competitors' delicate design. (Dual plane swivel fittings shown on wrench above.)Light/Ergonomic - Reduces operator fatigue. Tool can also be used with an overhead spring balancer, which allows you to set the tool as light as 1 pound.Calibrated - Every tool is tested and calibrated to +\-.03 accuracy, traceable to N.I.S.T.
联系方式