上海基带通讯科技有限公司
主营产品:
2023年11月09日 08:24
The MP-2320RX is a comprehensive family of RF/Fiber Optic Receivers that are designed to provide optical-to-electrical (O/E) conversion of broadband RF signals over a frequency range of 1.0 MHz to 3.0 GHz. The receiver family is comprised of four model variants that operate over a unique frequency range as indicated in the part number generator tool on page two. The utilization of the MP-2320RX, in conjunction with the appropriate MP-2320TX RF/Fiber Optic Transmitter, forms a broadband link capable of supporting the transmission of RF signals over singlemode optical fiber for use in a wide array of communication applications. The link applications include antenna remoting, time and frequency reference distribution, RF delay lines, telemetry tracking, and point-to-point RF transmission. The receiver utilizes a high speed, low distortion PIN photodiode detector that is integrated with a broadband RF post amplifier. The unit provides the user with status monitoring through the use of an onboard processor that communicates to a host computer over an RS-232 or RS-485 I/O interface. The I/O parameters include received optical power, temperature and alarm status. In addition, the receiver's post-amplifier gain can be adjusted using the integrated variable RF attenuator. The attenuator's adjustment range is 0.0 dB to 35.0 dB in 0.5 dB increments. The receiver is also available without a RF post amplifier.
Applications:
◆Wideband RF Transmission
◆Antenna Remoting
◆Trunking Radio
◆L-Band SATCOM
◆GPS
◆Wireless/ PCS
Features:
◆WDM Compatible
◆Wide Bandwidth, 1 MHz to 2250 MHz
◆High Dynamic Range
◆Low Noise Laser Diode
◆RS-232 or RS-485 Data Port (opt)
◆1 Year Full, 2 Year Limited Warranty
Optical Parameters: Spec Value Operating Wavelength 1200 nm to 1600 nm Input Level (Max) +5 dBm Responsivity (min) 0.85A/W@1310 nm,0.90 A/W @ 1550 nm Input Backreflection -55dB to -63 dB Opt Fault Threshold Factory preset to -12 dBm RF Channel Spec Value Bandwidth 1 MHz to 3000 MHz Gain (min) 28.0 dB Flatness (max) +/- 1.0 dB 1 dB Comp. Level (min) 18.0 dBm OIP-3 (min) @ 2x0 dBm 28.0 dBm Noise Figure (max) 3.0 dB
联系方式