佛山市锦瀚粤海航机械设备有限公司
主营产品:
2023年09月24日 15:36
型号 |
198*150 |
加工定制 |
是 |
品牌/型号 |
粤航牌/198*150 |
产品别名 |
电磁感应炉 |
产品用途 |
模具加热 |
节电设备类型 |
工业节能设备 |
电磁感应快速模具加热炉技术参数
◆ 快速加热(10-20分钟)
◆ 高效节能(比传统电阻式加热炉节省20%以上电耗)
◆ 有效减少模具长时间高温氧化影响,提高型材表面质量
模具快速加热炉介绍
Introduction of the Die Rapid Heating Furnace
推出的模具加热炉,是一种即高效又节能的新型模具快速感应加热炉。它通过微电脑设定程序控制,自动进料,自动加热升温,温度控制精准,模具加热到设定温度后,可自动退出加热系统,与传统加热方式相比,具有不可比拟的优势,见下表:
The latest Die heating furnace which is produced by ALUMAC,is a highly efficient and energy-efficient die fast induction heating furnace. It does this by setting microcomputer program control, automatic feeding, automatic heating temperature, precise temperature control, mold heated reaches at the set temperature, the heating system can automatically withdraw, as compared with conventional heating, has incomparable advantages, see the table as below :
铝材模具新旧加热方式对比表
Mode of heating Contrast table between the old model and the new model
对比内容
Contents原加热炉
old furnace现用加热炉
New furnace对比优势
Comparative advantage加热方式
Mode of heating电阻丝、油煤气发热
resistance wire、Oil and gas calorific高效感应加热
Effective induction heating用电很小,节能、高效加热
energy saving, high heating加热控制
Heated control传统温控
Traditional Temperature control电脑程序控制
The computer program control温度控制采用智能化控制
intelligent controlling加热时间
Time of heating150分钟以上
More than 150min15分钟左右
Approximate 15min受热短、延长模具寿命
Heated shortly,prolong the life of die加热效果
Effect of heating偏烧、过烧
unsymmetric burning ,over burning表里加热均匀
Inside and outside Heated evenly温度均匀,提高产品质量
Temperature uniformity, improving product quality温度控制精度
The precision of temperature controlling不稳定、温差大
Unstable, large temperature difference稳定、温差小
Stability, small temperature difference温度均匀,提高产品质量
Temperature uniformity, improving product quality耗能
wasted energy耗煤耗电大
Large consumption of the coal and electricity耗电很小
Small consumption of the electricity节约电费,有效降低生产成本
Saving electricity, reducing the production cost effectively环境影响
Environmental impact有烟尘,温度高
Smoke&dust, high temperature无烟尘,温度低
No smoke&dust,low temperature有效改善工作环境
Effectively improve the working environment
模具快速加热炉特点:
Characteristics of die rapid heating furnace
通过比较可以看出,模具快速感应加热炉生产效率是传统电热阻加热炉的10倍;加热时间短,即加热即使用,可做到快速换模。同时,加热同样重量模具的能耗只是电阻加热炉的1/4.
As can be seen by comparing ,the Die rapid heating furnace production efficiency is a traditional electric resistance heating furnace 's 10 times; Heating time is short, that is, it can be working when it's heating .and can be achieved to change Die quickly . Mornover, the heating energy consumption of the same weight of mold-resistance furnace is only 1 / 4.
选择模具快速加热炉,节能、高效、安全、环保、长寿命。是您明智的选择。
Choosing the Die Rapid Heating Furnace which is energy saving, high efficiency, safety, environmental protection and long life,is your wise choice.
联系方式