揭阳市蓝城区磐东金鑫机械加工厂
主营产品:
2023年09月15日 08:52
种类 |
压力机 |
型号 |
JX-0805 |
用途 |
家具滑轨 ,五金滑轨 |
外形尺寸 |
5000*1650*620(mm)(mm)(mm) |
重量 |
2(t)(t)(t) |
别名 |
钢珠滑轨机械 |
规格 |
5000*1650*620(mm) |
产品说明 Introduction
设备基本结构:一、自动进料成型冲孔切断卸下机构。二、调直部份采用能:上、下、左、右调动保正滑轨质量标准,方便技术人员的调动。三、采用编程控制器(HLP或JDIA)控制。四、效益分折:6—16米/1分钟,损耗少。Equipment basic structure: 1, automatic feed, forming, punching, cutting, unloading. 2, transfer straight over to the right part of the mobilization of slide quality standards. Convenient mobilize. 3, using programmable controller (HLP or JDIA). 4, 6-fold benefit sub-16 m / min, less wear and tear.
特点:
1、本机融入我厂多年来的设计、制造经验,先进的设计理念及加工工艺。
2、采用数控设备加工,提高滚轮尺寸精度。
3、由于设计合理、准确,且加工的精度高,使设备稳定性好,生产出来的产品稳定、精度高。
4、采用冲床省电,有提高生产效率,长度定位准确。
5、整体自动控制,操作方便,效率高。
6、冲孔可一次冲出跟切割断加压型。
主要工艺流程:卷料被动放料→进料导料→滚压成型→校直→液压定长切断→卸料。整个过程自动完成
Characteristic:
1.This machinery is integrated into the design and manufacturing for many years of our experience, including the design concept and advanced processing technology.
2.Using the numerical control processing equipment, improve the roller size precision.
3.Owing to the reasonable design、accurate, and the processing precision is high, so that the equipment is good in stability, out of the product of high precision and stability.
4.Our products through energy saving, improve production efficiency, and the length positioning of the products are accurately.
5.Our products can totally automatic control, convenient operation, high efficiency.
6.Our machinery can produce many type of products, such as cut off type and pressure type.
联系方式