汽车检测仪 2009欧宝

Software Version 090714 英文版

Firmware Version V01.39

is a PC based Opel diagnostic program. This interface can read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.

The program supports many control units, such as

EngineAutomatic TransmissionABS

Airbag

Engine Cooling module

Instrument Cluster

Electronic Climate Control

Body Control Unit

Many others..........Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.

PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)

Fault codes will be shown with all available information:

Full fault code text description

Full status information (Present, Not present, Intermittent)

You can print out, save, or copy the fault codes to any other application.

From the fault codes window, you can go directly to the measuring blocks window.

The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!

You will get a feedback on the state of the activated output. This will helps you to find the failed components more easily.

With , you can learn keys to immobiliser, and remote keys to the central door locking, or alarm.

You can also reset, and program the following immobiliser related items: ECM, BCM, IPC.

You will need the vehicle security code, which can be found on the CAR-PASS.

You can also reset, and program the Service interval reminder on Astra-G, Zafira, Corsa-C, Meriva, Tigra-B

You can code SAB6, and SAB8 airbags with the software.

The diagnostic inteface is USB port based, so there will be NO COMPATIBILITY ISSUES, with serial to USB converters.

The speed of the communication over the USB-BUS is enough to handle the awesome speed of the High-Speed CAN-BUS systems, which is currently 500kbps. This is the main reason, why only the USB port based interface is available for CAN-BUS.

Support 2008 Models

Support Saab 9-5 and Saab 9-3 CAN

Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B

----------------------------------------------------------------------------------------------------------------欧宝()能够检测几乎所有欧宝车,包括出产的支持CAN-BUS的车型,如威达-C,雅特-H,赛飞利-B等.

功能:

本产品附带测试程序,能读取和清除故障码,显示数据流,能输出测试结果,配钥匙,并且支持遥控.

产品信息：欧宝()能够检测几乎所有欧宝车,包括出产的支持CAN-BUS的车型,如威达-C,雅特-H,赛飞利-B等车系。说明文件：本产品附带测试程序,能读取和清除故障码,显示数据流,能输出测试结果,配钥匙,并且支持遥控。系统要求：■ 电脑硬件：P233以上CPU，32M内存，1G硬盘，光驱

■ 操作系统：WINDOWS XP/NT/98/ME

■ 外围设备：打印机，MODEM等

■ 串行口：标准RS232

■ USB接口：专用USB 主要规格 / 特殊功能:OPEL汽车 CAN总线接口适合多数Opel汽车，甚至适合带有CAN总线基础的诊断系统程序能让您读出和清除默认代码，执行输出检测，支持遥控和按键编成程序支持多个控制单元车身控制单元因为Opel在OBD上多个插脚诊断界面可像多路器一样功能，默认代码将显示各种信息全默认代码文本描述全面的状态信息（目前、不在当前和间歇）从默认代码窗口能直接测量阻塞窗口程序显示各个控制模块的阻塞信息，并能选择用户程序的各种信息程序同时显示8个测量块参数取样取决于老系统的大部分通信协议，在通信或单元变快时（使用KWP-2000）和CAN基本控制单元变快，Omega-B X 25 DT引擎(ISO-9141-2）缓慢能够进行多种控制器的测试