深圳市长园长通新材料有限公司
主营产品:
2023年12月16日 13:01
品牌 |
CYG长园 |
型号 |
T-100 |
材质 |
交联聚乙烯 |
适用范围 |
用于PE、PP-R 及PVC 等塑料给排水管线的补口、补伤,弯头、弯管、三通和绝缘法兰等异型管件防腐 |
产地 |
深圳 |
规格 |
各管径 |
品牌/型号 |
CYG长园/T-100 |
产品特点( Features and Benefits)
Ø 选用聚乙烯和丁基橡胶为基本原料,绝缘防腐性能优异,且吸水率小。
Ø Polyethylene and butyl rubber are the essential materials .The tape has excellent insulation and low water absorption.
Ø 胶带总厚度0.4-1.3mm;基膜厚度0.25-0.8mm,胶层厚度0.1-0.9mm。
Ø The thickness of the tape is from 0.4 to 1.3 mm; the polyethylene layer is from 0.25 to 0.8 mm, and the adhesive layer is from 0.1 to 0.9 mm.
Ø 耐温范围广,从-30℃~~80℃范围内使用性能稳定。
Ø The tape covers a wide range of heat-resistance from -30℃to 80℃, with good performance.
Ø 防腐效果好,且耐碰撞性亦佳。
Ø Goodanticorrosion and crashworthinessare obtainedby the tape.
Ø 使用寿命长,有30年以上的寿命。
Ø Providing longevity of service, the tape almost can use for 30 years.
Ø 应用范围广,从50-1800mm的管道。
Ø The application is wide, suitable for the pipes from 50mm to 1800mm.
Ø 施工方便,操作安全卫生,适合于常温工厂预制和工地现场施工。
Ø Having convenient and safe operation, the tape can apply to factory and building site.
Ø 综合成本低。
Ø The cost is very low.
产品性能( Properties )
聚乙烯胶粘带标准:中华人民共和国石油天然气天然气行业标准SY/T0414-2007《钢质管道聚乙烯胶粘带防腐层技术标准》Technical standard of polyethylene tape coating for steel pipeline.
序号
No.
项目名称
Item技术要求
Standard
测试方法
Test Method
防腐带
T-1001拉伸强度Film Tensile Strength (Mpa)≥18GB10402屈服强度 Yield Tensile Strength (Mpa)≥15GB10403断裂伸长率Elongation (%)≥200GB10404剥离强度Peel Strength (N/cm)
(对底涂漆钢) (To Primed Steel Plate)≥25GB27925剥离强度Peel Strength (N/cm)
(对基材) (To Back Material)5~10GB27926电气强度Dielectric Strength (MV/m)≥30GB14087体积电阻率Volume Resistivity(Ω.m)≥1×1012GB14108吸水率Water Absorptivity(%)≤0.1SY04149水蒸气渗透率Vapour Permeability
(mg/cm2.a)≤0.2GB103710适用温度5~50℃-11颜色黑-
防腐带( Anticorrosion Tape )
Ø 以聚乙烯为基材,熔融热复合,以丁基橡胶为主体
的防腐胶粘层,共挤压延而成。
Ø Polyethene is used as the base material which is coated by the
liquid butyl rubber film, both of which are pressed and compounded.
Ø 主要应用于各种埋地、水下或架空管道的绝缘防腐。
Ø It is mainly used on underground, under-water and overhead
pipelines. The major function for the tape is for anticorrosion of pipes.
联系方式