通道2位升/降计数CNT24-4(PCI)H

[table][tr][td]Product[/td][td]:[/td][td]4Ch 24Bit Up/Down Counter Board for PCI[/td][/tr][tr][td]Product Code[/td][td]:[/td][td]CNT24-4(PCI)H[/td][td] [/td][td] [/td][td] [/td][td] [/td][td] [/td][td][/td][/tr][/table][table][tr][td][/td][td] The CNT24-4(PCI)H is a PCI bus-compliant interface board that counts input pulse signals from external devices. The CNT24-4(PCI)H has four channels of 24-bit up/down counters, allowing external devices such as a rotary encoder and a linear scale to be connected. The pulse signal inputting interface is photo coupler isolated or TTL-level input. Furthermore, this board is exchangeable within the system already built for the product with the compatibility of the higher rank of CNT24-4(PCI) currently made from CONTEC. With the Windows version, the Linux version driver (API-PAC(W32)).[/td][/tr][/table][table][tr][td]Electric Certification Compliancy[/td][td]:[/td][td] N/A;[/td][td] [/td][/tr][/table][table][tr][td]Environment Compliancy[/td][td]:[/td][td] RoHS Directive;[/td][td] [/td][/tr][/table][table][tr][td]Function[/td][td]:[/td][td] [/td][/tr][/table][table][tr][td][/td][td]It is equipped with four channels of 24-bit up/down counters.[/td][/tr][tr][td][/td][/tr][tr][td][/td][td]The board can count two-phase signals, which can be outputs of some rotary encoders and linear scales.[/td][/tr][tr][td][/td][/tr][tr][td][/td][td]You can select either a photo coupler isolated input or a TTL-level input for each channel by software command.[/td][/tr][tr][td][/td][/tr][tr][td][/td][td]Each channel can generate an interrupt request signal and a one-pulse output signal when the count data matches a pre-specified value.[/td][/tr][tr][td][/td][/tr][tr][td][/td][td]The board is equipped with a programmable timer to allow interrupts to be generated periodically according to a specified timer value.[/td][/tr][tr][td][/td][/tr][tr][td][/td][td]Each Channel is equipped with a general-purpose input signal (both photo coupler and TTL).[/td][/tr][tr][td][/td][/tr][tr][td][/td][/tr][/table] [table][tr][td]Counter motor control[/td][td]:[/td][td] [/td][/tr][/table][table][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Bus[/td][td]:[/td][td]PCI; [/td][/tr][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Function[/td][td]:[/td][td]Counter ; [/td][/tr][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Number of motor ch[/td][td]:[/td][td]-; [/td][/tr][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Motor speed range[/td][td]:[/td][td]-; [/td][/tr][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Number of counter ch[/td][td]:[/td][td]4ch; [/td][/tr][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Count method[/td][td]:[/td][td]24bit Up/Down ; [/td][/tr][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Counter response frequency[/td][td]:[/td][td]Isolation : 500KHz / Un-isolation : 1MHz; [/td][/tr][tr][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][td] [/td][/tr][/table][table][tr][td][/td][/tr][/table][table][tr][td]Related Product[/td][td]:[/td][td] [/td][/tr][/table][table][tr][td] [/td][td]Product[/td][td]Product Code[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-SUB (Female) Connector Five-piece Set[/td][td]CN5-D37M[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]Screw Terminal (M3.5 x 37)[/td][td]EPD-37[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]Windows version Counter driver[/td][td]API-CNT(98/PC)[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]30pin Header to 37pin D-type(F) with Bracket-1.5m[/td][td]DT/B2[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) to Open-Ended, Flat Cable(1.5m)[/td][td]PCA37P-1.5[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) to Open-Ended, Flat Cable(3m)[/td][td]PCA37P-3[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) to Open-Ended, Flat Cable(5m)[/td][td]PCA37P-5[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 0.5m)[/td][td]PCA37PS-0.5P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 1.5m)[/td][td]PCA37PS-1.5P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 3m)[/td][td]PCA37PS-3P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]A one end connector shield cable for 37 pin D-SUB connectors with(Mold type, 5m)[/td][td]PCA37PS-5P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) at Each End, Flat Cable(1.5m)[/td][td]PCB37P-1.5[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) at Each End, Flat Cable(3m)[/td][td]PCB37P-3[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) at Each End, Flat Cable(5m)[/td][td]PCB37P-5[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) at Each End, Shield Cable(0.5m) Low Cost[/td][td]PCB37PS-0.5P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) at Each End, Shield Cable(1.5m) Low Cost[/td][td]PCB37PS-1.5P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) at Each End, Shield Cable(3m) Low Cost[/td][td]PCB37PS-3P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]37pin D-type(M) at Each End, Shield Cable(5m) Low Cost[/td][td]PCB37PS-5P[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]Linux version Counter Input Driver[/td][td]API-CNT(LNX)[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]Screw Terminal (M3 x 37)[/td][td]EPD-37A[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]ActiveX components sets for measurement system development[/td][td]ACX-PAC(W32) Ver.5.0[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]VI Library of data acquisition for LabVIEW[/td][td]VI-DAQ[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]Screw Terminal (M3 x 37)[/td][td]DTP-3A[/td][td] [/td][td] [/td][/tr][tr][td][/td][td]Screw Terminal (M2.6 x 37)[/td][td]DTP-4A[/td][td] [/td][td] [/td][/tr][/table][table][tr][td] [/td][/tr][/table]