SS317L 不锈钢仪表管，S317钢管，S317L钢管，SS317L钢管

Salem Tube is a wholly owned subsidiary of TUBACEX GROUP, one of the leading producers of seamless stainless steel tubing products in the world. This offers the benefits of a well respected international corporation with sales offices throughout the world, as well as an integrated source for materials from start to finish.

Operating in a 185,000 square foot facility, Salem Tube utilizes weld mills and cold draw benches to produce stainless steel and nickel alloy tubing from 1/8” to 2” od in over twenty five different alloys that meet the highest quality standards.

Salem Tube Inc. was established in 1977 in Greenville, PA and became a wholly owned subsidiary of TUBACEX in 1995.

HistorySalem Tube Inc. was established in 1977, located on a 10-acre tract in the Reynolds Industrial Development Park in Greenville, Pa. In 1995, the company became a wholly owned subsidiary of Tubacex, an industrial group founded in 1963 devoted to manufacturing seamless tubes in stainless steel and high-nickel alloys.

The group is headquartered in Llodio, Spain, where it also has industrial facilities, in addition to those located in Ternitz, Austria and Greenville, Pennsylvania – a broad network of sales offices spread around the world.

Interesting Facts about Salem Tube, Inc.Salem Tube was purchased by Tubacex Group in 1994.Entered the Aerospace market over 25 years ago.Salem Tube entered the Nuclear seamless tubing market in 2009, and achieved material organization status and QSC 602 was issued to company.An Emo Degreaser was added in 2009 with state-of-the-art technology to further reduce our environmental footprint at the facility.In 2012, Salem Tube added in-house NDE capabilities for ultrasonic testing and eddy current testing to meet customers specifications within demanding niche end markets.In 2013, Salem Tube Inc. achieved NORSOK Certification M650 and became the first North American small-diameter seamless tubing mill to be awarded this important status for the Oil and Gas sector.Salem Tube added plug drawing capabilities in 2013 to further expand our existing size range for aerospace and other high-end applications.Salem Tube acquired adjacent property to our site in 2013 and proceeded with site improvements ready for future expansions.Salem Tube received NADCAP Certification for Material Testing Laboratory in 2013, followed by Heat treatment in 2014, and NDE is pending approval for 2015.A state-of-the-art laboratory was completed in 2014.A new finishing building was completed in 2014, increasing our square footage to over 200,000 square feet on-site.Products & ServicesSalem Tube Inc., a subsidiary of Tubacex, manufactures the widest range of stainless & nickel alloy tubing used in a wide array of applications. The company custom produces tubing to many specifications and from 1/8″ to 2″ OD as well as 0.020 in. to 0.200 in. wall thickness in over twenty five different alloys . Capabilities Chart

This extensive tube offering also includes very quick lead times, long and custom lengths (up to 72′) and in-house comprehensive testing. The competitive global market demands quality and service, and Salem Tube has invested heavily to remain the top redraw manufacturer in the U.S.A.

Salem tube’s laboratory is NADCAP certified. The company offers state of the art finishing lines complete with U.T. testing on site. For over thirty years, Salem Tube has been the proven and trusted source to meet the stringent requirements of the many demanding end users for seamless, welded and drawn tubing.Hydraulic and Instrumentation TubingHydraulic and Instrumentation Tubing has been a large part of Salem Tubes’ product offering from the very beginning. All tubing is provided with a smooth, bright, uniform surface finish in 20′ random lengths (6 meter) or custom lengths also can be provided. Instrumentation tubing is bought and used in a wide variety of applications including panel boards, medical/dental instruments, fuel lines, control lines, and hydraulic lines. Salem Tube offers the following sizes in both 304/304L and 316/316L grades:ODs1/4″3/8″1/2″Walls.035

.049

.065.035

.049

.065.035

.049

.065Heat Exchanger TubingSalem Tube’s heat exchanger tube program encompasses over twenty five alloys from austenitic stainless, duplex stainless steels and nickel alloys. The company’s heat exchanger tube is custom manufactured to each project and is suitable for all types of exchangers including, evaporators, feed water heaters, desalination, condensers, and geo thermal just to name a few.

Salem Tube manufactures heat exchanger tubing in ODs from 5/8″ to 2″ and walls from .028 to .154 and up to 72′ lengths. All of its heat exchanger tubing is provided at competitive prices, quick lead times and tested to countless customer and industry specifications. Salem Tube continues to serve this market with a combination of technical expertise and experience to provide high-performance materials for the most demanding applications.Aerospace and Military TubingAerospace and Military Tubing companies and their design engineers are held to a very high level of ethics and performance criteria, this industry demands products that meet the most stringent requirements and non-conforming parts would ever be acceptable. The companies that support this market must also manufacture consistent quality and deliver component parts t meet the specific timelines. The strict controls allow for assembly plants to meet the build schedules and perform all the necessary safety checks before delivering the completed aircraft to the final customer.

Salem Tube has been producing aerospace tube products for many years, meeting and exceeding the requirements of this industry. These products are used for numerous applications such as fuel, hydraulic, bleed, and cooling lines, in addition to applications in landing and structural components.

High Pressure TubingHigh Pressure Tubing products have been used for many years to transport fluids and gasses that are under extreme pressures ranging from 15,000 psi to 40,000 psi but as industry demanded to drill deeper into the surfaces of the earth and cut harder materials the requirements for higher pressures began to push systems to new levels within this industry. 60,000 psi is not uncommon as a standard market request and Salem Tube has positioned itself to be a strong supplier to the customers of this growing market demand.Seamless High-Pressure tubes are used in a wide variety of applications using liquid or gas as the pressure medium, such as hydraulic installation and water jet cutting operationsPressure tubes are defined by the high yield / high tensile strength in connection with high elongationsMarketsSalem Tube, Inc. supplies tubing into many high demanding markets including Oil & Gas, Aerospace, Chemical & Petro-Chemical, Nuclear, Food Processing and Automotive. Our customer base covers six continents and includes many of the respective industry leaders and other world class companies, relying on our comprehensive approach to quality and service to meet their demands.Oil & Gas/UpstreamTubacex Group produces a comprehensive range of tubes for on-shore and offshore applications:

Plain end OCTG tubes for tubing and casing, as well as of coupling mother tubes and mechanical tubing for accessories. These are in corrosion resistant alloys (CRA), from duplex stainless steels (DSS) up to sophisticated nickel alloys, with high mechanical properties suitable for the use in corrosive and difficult conditions (pressure, temperature, aggressive environments…).

In subsea, TUBACEX along with all the subsidiaries is capable of supplying the complete scope SURF products. Salem Tube is fully Norsok qualified for the Duplex, Superduplex and 6Mo grades and it is capable of supplying the complete range of austenitic grades as well as High Nickel alloys such as A825 and A625.

Salem Tube provides the small size tubing for the subsea Hardware (manifolds, Christmas Trees, boosting systems…). All the connections such as Jumpers and Flowloops are within the product portfolio.

The steel Umbilical tubes are manufactured in a sister company of Salem, Shoeller-Bleckmann located in Austria. Umbilical tubes are produced bya state-of-the-art equipment in a wide range of dimensions. The tubes can be manufactured in single-piece long straight length, or welded and coiled on reels.

Risers along with the Flowlines, could be supplied in all range of seamless steels tubes up to 2″.

Other tubes including precision and hydraulic tubing Tubacex has a long established experience in manufacturing pipes and tubes of standard and non-standard sizes in stainless steel grades, providing high resistance to corrosion combined with high mechanical properties being so critical in subsea (incl. deepwaters) and enhanced recovery installations.

Downstream:

Tubacex is a world leader in the tubular solution market for the Oil & Gas Onshore, Offshore, Power Generation and other applications, from the Upstream to the Downstream through the Midstream. Particularly in the downstream with our pipes, heat exchangers, furnace & fire heater pipes and tubes for all the sector. Our portfolio covers the manufacturing of stainless steel pipes and tubes, instrumentation tubing, hollow bars, fittings and other products both from production and stock as well. A long experience in the business and a complete reference list in this application place Tubacex as the worldwide market leader. Main final destination of our material would we: Oil & Gas Onshore projects: GTL, LNG, Refinery, Gas compression, Chemical, Petrochemical plants and others.NuclearIn power plants and the energy sector our tubes and pipes are primarily used for boiler equipments. The same application area also applies to environmental technologies and waste incineration plants. These equipments can be either subcritical or supercritical – above 550o.

In addition, Tubacex Group has a growing presence in the manufacturing of tubes for the nuclear industry.

Salem Tube manufactures heat exchanger tubes for nuclear applications, which are usually located in the auxiliary systems of BNI (Balance of the Nuclear Island). Salem Tube also manufactures other type of tubes for nuclear application like nuclear submarines or Fuel Fabrication Facilities MOX (Mixed Oxide).

The company is ready to supply the nuclear industry either in new works or in repair works thanks to its flexibility.

Salem is qualified to certify their products in ASME III class I, II, III and counts on a large experience in the fields of manufacturing and quality control of nuclear material.

Other markets:

• Process Industries (including pharmaceutical, food processing and a wide range of industries) are growingly using seamless stainless steel tubes and pipes in their developments.

• Precision tubes: Salem Tube produce instrumentation tubes up to 3mm OD in the tightest tolerances in a wide range of stainless steel and high nickel alloy tubes for electronic industry.