徐州凯林木业机械厂业务部
主营产品:
2023年09月29日 10:51
1. 本机适用于装饰板、胶合板、细木工板,建筑模板覆膜板,地板,lvl同向板厂预压工序;
2. 总体结构设计采用国际先进技术,结合新工世要求,精心设计制造;
3. 液压系统及电路均经过精密试验,活动横梁无自落现象,确保品质卓越;
4. 液压缸采用特殊超硬材料,柱塞硬度达HRC55以上,密封采用低阴力阶梯圈,无漏油,使用寿命长,保养成本低;
5.本机可配 进出料机构,采用链条传动,对板坯无损伤。
1. The machine is used for Pre-pressing process of making plywood, blockboard and decorative board.
2. The whole structure is designed and manufactured elaborately based on advanced international experience and new technological requirements.
3. The electric system and hydraulic system of the machine have been examined precisely and the free-beam will not fall by its own gravity with results assuring excellent quality. 4. The cylinders are made of super-hard metal(plunger hardness above HRC55),and sealed with low-resistance stepped gaskets,giving no oil-leakage,long service life and low maintenance cost.
5. Chain transmission is adopted for the feeding and discharging mechanisms,causing no damage to the plate bland,and thus it is recommended for the production line of decorative veneer boards. 基本参数MAJOR TECHNICAL PARAMERS 序号
ITEM N0 名称
DESCRIPTION 单位
UNIT 规格
SPECIFICATION 备注
REMARKS 01 幅面尺 PLATEN DIMENSION (mm×mm) 2700×1400 02 公称总压力 NOMINAL GROSS PRESSURE (Tons) 450 03 额定油压 NORMAL OIL PRESSURE (Mpa) 28 04 主油缸 MAIN CYLINDER (mm) ф320×1000 05 副油缸 MINOR CYLINDER (mm) ф80×1000 06 工作间距 OPENING LIMIT (mm) 300-1600 07 油缸行程 STROKE OF CYLINDER (mm) 1000 08 动 力 液压站电机 HYDRAULIC CENTER MOTOR (kw×p) 7.5×4 POWER 输送电机 TRANSFERRING MOTOR (kw×p) 2.2×4 09 外形尺寸 OVERALL DIMENSIONS (mmL×mmW×mmH) 3860×2200×4900 10 净重 NET WEIGHT (Tons) 14
联系方式