防静电抗疲劳地垫:ESD980

产品名称:Electrically Conductive Anti-Fatigue Diamond-Plate防静电抗疲劳地垫

产品型号:ESD980

产品类别:41

详细描述

The Electrically Conductive Anti-Fatigue Vinyl Diamond-Plate surface quickly drains static electricity from workers before it can be passed on to sensitive equipment such as computers, cash registers or any product with a computer chip. Designed to dramatically reduce standing worker fatigue, Electrically Conductive Anti-Fatigue has a Nitricell® "Supreme Comfort" sponge base. Overall 9/16" thick. For maximum effectiveness, ground the mat and keep the surface clean. Colors: Black (BK)

L: 24"---40' ( 0.6M ---12.2M )

W：24"/36"/48" ( 0.6M/0.9M/1.2M)

Thick: 0.6"/0.9" ( 15MM/23MM)

Homogeneous Vinyl with Diamond Plated Surface Pattern Surface

Consistent electrical and slip resistant properties

Laminated Foam Rubber Anti-Fatigue Base

Foam rubber base will not break down or absorb moisture like vinyl products

Exceeds ANSI/ESD S20.20 required limit 10E9 ohms for ANSI/ESD floor

Suitable as floor in ANSI/ESD STM 97.1 floor-footwear system

Diamond Plate Pattern

Provides better traction especially where moisture may accumulate

Highly Visible Yellow Border with Beveled Edges and Radius Corners

Allows carts and chairs to roll over without damage

Works in Conjunction with Conductive ESD Tiles or Paint

Maintains consist path to ground when on operator is on properly grounded conductive floor mat

Grounding Hardware Included

Inpidual mats should be grounded. Linked mats should be grounded every 10-12 feet.

Made In China

*Conductive (<10E6) as defined by ANSI/ESD S7.1, Floor Materials – Characterization of Materials.

**Designed to exceed requirements of ANSI/ESD S20.20 for primary ground of mobile operators, Flooring / Footwear System – Method 1, <3.5 X 10E7 Operator Resistance to ground, tested per ANSI/ESD STM 97.1, Floor Materials and Footwear – Resistance Measurement in Combination with a Person, when used with proper ESD foot grounders.

“ESD protective flooring, used with approved footwear, may be used as an alternative to the wrist strap system for standing operations.” (ANSI/ESD S20.20 section 6.2.2.2 Personnel Grounding Guidance)

“The use of floor materials to control personnel or equipment generated static has a number of benefits. Floor materials tend to be passive. Employees who work in areas protected with floor materials simply need to wear and test the appropriate footwear. They do not need to implement any additional actions themselves to assure that the floor material is functioning properly.” (ESD Handbook TR20.20 section 5.3.4.4)