赛浦斯VPW6300AR-MW6-220晶圆吸笔

产品认证1用途范围1 PORTA-WAND 3 Kit With Molded Peek Wafer Tip [VPW6300AR-MW6-220] Series 3 PORTA-WAND with MOLDED PEEK wafer tip VMWT-B, handles up to 6? (150mm) wafers, 220 VAC. This PORTA-WAND 3 kit comes with a fixed internal 9.6V NiMH rechargeable battery, an in-stand charger (P/N VPW6000-CHRG) and one MOLDED PEEK wafer tip. Ideal for handling wafers, disk media or any item that has a flat, hard surface. Easily lifts 300mm wafers. Rear exhaust of the pump air is standard on these units. The OPERATION INDICATOR turns on only when proper vacuum has been established to firmly grip the wafer. The same light flashes when the battery needs to be recharged. A PUSH-BUTTON provides easy on/off control. An internal air filter (VPW6000-FIL-5) is replaceable from the front of the tool, and an internal exhaust filter ensures better than Class 1 performance. Optional Feature: The two pins at the front of the tool allow use of the optional anti-rotate adaptor. This adaptor locks any of our molded wafer tips into one of eight rotational positions around the front of the wafer handling tool. See item number VMWT-ADAPT-AR on page 32 for a description of the operation