美国3G喷油嘴清洗保护剂自带压型

美国3G燃油系统（喷油嘴）清洗保护剂自带压型 3G PARTⅡ- NO8001

Nozzle cleaning protective agent-Cabin pressure type

产品性能

适合高压喷射引擎系统；彻底清洗喷油嘴、进气门和燃油室的积碳；恢复引擎动力，节省燃油；防止积碳形成及引擎爆震，减少废气排放。无需外接电源、气源，不占工位，操作方便。

使用方法

需使用专用燃油自带压清洗设备

1. 启动引擎打开油箱，断开油泵，消耗掉油路里的残留汽油。

2. 确认油泵已断开，将专业设备接通进油管，调整压力工作至空罐。

3. 清洗完毕，重新连接油路、油泵，盖上油箱，启动汽车引擎，观察是否有漏油现象。

Product effect

Suitable for high pressure jet engine system; Thoroughly clean the nozzle, the inlet valve and fuel chamber carbon deposition; Restore the engine power, save fuel; To prevent carbon formation and engine detonation, reduce exhaust emissions. Without external power supply, gas source, does not occupy a location, easy to operate.

Using method

Need to use a dedicated fuel cabin pressure cleaning equipment

1. Start the engine to open tank, disconnect the pump, consume the residual gas in oil.

2. Confirm the oil pump has been disconnected, to professional equipment connected into tubing, adjust working pressure to empty cans.

3. After cleaning, reconnect the oil, oil pump, tank cover, start the car engine, observe whether there is oil leakage.

Points for attention

Do not put this product into your mouth, and keep it away from away from children and store flammable!!