温州华诚机械有限公司
主营产品:
2023年08月03日 09:13
型号 |
JGGB630/1+12型管式绞线机双轴承式 |
电源电压 |
380V(±10%);50HzV |
主轴方向 |
左右向可选 |
适用线径 |
φ1.5~φ5mm(mm)(mm) |
规格 |
来电详谈 |
品牌/型号 |
温州华诚/JGGB630/1+12型管式绞线机双轴承式 |
'
JLK630/1+12 Tubular Stranding machine with three big bearings
JLK630/1+12管式绞线机-三个大轴承
1、GENERAL DESCRIPTION/概述
This machine is suitable for producing 1+12 steel, compact, and bare Al/Cu wire, and ACSR, aluminum alloy wire.
本机主要用于绞制1+12 铝绞线及铜绞线,钢芯铝绞线。
2、 TECHNICAL PARAMETER/主要技术参数
2.1Stranding single wire diameterCu ø1.3-ø 3.5mm
Al ø1.3-ø 5.0mm
绞合单线直径:铜:ø1.3-ø 5.0mm
铝:ø1.3-ø 5.0mm
2.2Max stranding out diameter
25mm
绞合外径25mm2.3Max Speed of frame carriage400 r/min 绞笼转速400 r/min2.4Stranding pitch44.67~435.3mm 绞合节距44.67~435.3mm2.5Haul-off linear speed17.8~173.44m/min 牵引线速度17.8~173.44m/min2.6Power of main motor55KW AC x2
主电机功率55KW AC x2
2.7Haul-off capstan sizeΦ1600mm 牵引轮直径Φ1600mm2.8Center pay-off reel typePN800~PN1600
中心放线盘尺寸PN800~PN16002.9Pay off bobbin in the cagePND630 绞笼内放线盘PND6302.10Take-up reelPN1000~PN2000;PND400~PND630
收线盘规格PN1000~PN2000;PND400~PND630
2.11Height of center line of the equipment745MM 设备中心高745MM
3、 MACHINE COMPONENTS/主要组成部件
3.1.Φ1600mm pay off stand1 set Φ630固定式放线架、Ø1600mm放线装置各1套3.2.12 bobbin barrel1 set 12盘绞体1套3.3.Assembling die stand with compressed roller1 set 并线模座+紧压1套3.4.Post forming device1 set 整直机构1套3.5.#Type guiding stand1set 井字导轮1套3.6Compressed stand1set 紧压装置1套3.7.Lubrication oil supply station1set 润滑液供给站1套3.8.Transmission system1 set 主传动机构1套3.9.36 steps gear box1 set 36级变速箱1套3.10.Mechanical counter1 set 计米装置1套3.11Dia.1600 mm dual-capstan device1 set Ø1600mm双轮牵引机构1套3.12Dia.2000mm shaft-less take up stand1 set Ø2000mm端轴式收排线架1套3.13Electrical control system1 set 电控系统1套3.14Safety fence1 set 安全围栅1套
'
联系方式