Danbridge DB236 钽电容/铌电容/电解电容 测试仪/电容电桥

Danbridge DB236 钽电容/铌电容/电解电容 测试仪/电容电桥

DB236的描述

·可通过外部调试模块连接长测试电缆

·100kHz - 10kHz - 1kHz - 100120Hz的测试频率

·电容模式下测试C, D, ESR & Z @ 100 (120) Hz/100KHz,测量时间小于120ms

·C精确度高达0.05%及0.0002的D值精确度

·可分类输出第一第二频点的测试

·标准的IEEE,GPIB和RS232接口

·高速测量下的接触检测

·4个独立的发生器

·2ms的变频时间

·储存40种不同的归零值

·接触检测

·高保护2j/1kv

·主动保护连接

·External Bridge Module for long test cables

·100k - 10k - 1K - 100 (120)Hz test frequencies

·Tantalum mode with cap, tan d, ESR and Z testing @ 100 (120)Hz/100kHz in less than 200ms

·Accuracy 0.05% cap. and 0.005 for tan d

·Bin outputs for 1st. and 2nd. freq. as standard

·IEEE, GPIB and RS232C interfaces as standard

·Contact check included in the high speed test speed

·4 independent generators

·Change of frequency 2mS

·Storing up to 40 different zero adjust values

·Contact check

·High protection 2j/1kV

·Active guard connection

DB236的典型应用

·用于生产线的钽电容/铌电容和电解电容的自动测试

·大电容的品质控制

·高达mF级的电容测试

·在1KHz下检测C, ESR, D值同时在高达100KHz下测试阻抗值

·Automatic testing of tantalum/nobium and electrolytic capacitors in production lines

·Quality control large capacitors

·Testing of capacitors up to several mF

·Check of capacitance, ESR, tan d @ 1kHz and impedance up to 100kHz almost simultaneously