张家港轴承瓦房店

产品名称：调心滚子轴承

产品编号：22200 22300 21300

所属类别：29

产品描述：调心滚子轴承后置代号： 将后置代号为K、K30的圆锥孔调心滚子轴承，安装在相配的紧定套上，则成为后置代号为K+H型和K30+H型轴承。此种轴承可以装在没有轴肩的光轴上，适用于需要经常安装和拆卸轴承的场合。为了改善轴承的润滑性能，在轴承外圈车有环形油槽并钻有均匀分布的三个油孔，其后置代号为W33

详细信息：

调心滚子轴承简介：

调心滚子轴承具有两列滚子，主要承受径一载荷，同时也能承受任一方向的轴向载荷。有高的径向载荷能力，特别适用于重载或振动载荷下工作，但不能承受纯轴向载荷。该类轴承外圈滚道是球面形，故其调心性能良好，能补偿同轴度误差。

调心滚子轴承种类：

调心滚子轴承分为：圆柱形内孔、圆锥形内孔。

圆锥内孔的锥度分别为1：12的后置代号为K的调心滚子轴承（153000型或113000型）和 1：30的后置代号为K30的调心滚子轴承。此类轴承在与圆锥形轴个配时，内圈沿轴向移动可以调整轴承的径向游隙。

调心滚子轴承后置代号：

将后置代号为K、K30的圆锥孔调心滚子轴承，安装在相配的紧定套上，则成为后置代号为K+H型和K30+H型轴承。此种轴承可以装在没有轴肩的光轴上，适用于需要经常安装和拆卸轴承的场合。为了改善轴承的润滑性能，在轴承外圈车有环形油槽并钻有均匀分布的三个油孔，其后置代号为W33

Product name: self-aligning roller bearings

Product Numbers: 22200 22300 21300

Category: 29

Product description: self-aligning roller bearings rear code: will rear code for K, K30 taper hole self-aligning roller bearings, installed in the tight match is a set to cover on the rear code for K + H and K30 + H bearing. These bearings can be installed in the shaft shoulder axis of no, apply to need often installation and removal of the bearing occasion. In order to improve the lubrication performance, in bearing outer ring bearings car has oil drilling have uniform distribution and the three oil hole, then buy W33 code

Detailed information:

Spherical roller bearing introduction:

Spherical roller bearing has two columns of roller, mainly bear size a load, and it also can withstand any direction of the axial load. Have high radial direction load capacity, especially suitable for heavy work load or vibration, but unable to bear pure axial load. The bearing outer ring groove is spherical shape, so its self-aligning performance is good, can compensate for the coaxial tolerance of error.

Spherical roller bearing types:

Self-aligning roller bearings are divided into: cylindrical hole, the cone in the hole.

Hole taper cone of respectively of 1:12 rear code for K spherical roller bearing type 153000 or 113000 (type) and the rear code is 1:30 K30 of spherical roller bearing. In such bearing with conical shaft worthy, inner ring along the axial movement of the bearing can adjust radial clearance.

Spherical roller bearing rear code:

Will rear code for K, K30 taper hole self-aligning roller bearings, installed in the tight match is a set to cover on the rear code for K + H and K30 + H bearing. These bearings can be installed in the shaft shoulder axis of no, apply to need often installation and removal of the bearing occasion. In order to improve the lubrication performance, in bearing outer ring bearings car has oil drilling have uniform distribution and the three oil hole,