SUNKKO-797A微电脑脚控式精密点焊机

SUNKKO-797A微电脑脚控式精密点焊机

特点：

微电脑芯片精密控制闪速（0.5~5ms）点焊模式；

可以焊接更薄镍片（0.03~0.06mm）的单脉冲闪速焊接模式；

独具单脉冲/双脉冲/16脉冲的阔范围三种选择。

增设旋钮式快速大电流设定功能，适合厚工件之点焊

轻巧吊臂式（可调高低）脚踏点焊控制机构，轻巧省力。

专业焊针压力调节器，方便不同厚度之工件，焊点更牢固

可外接点焊放电桌面开关，焊针到位与点焊放电独立控制

采用美国氧化铝合金长寿焊针，点焊火花飞溅小，焊接可靠。

可快速轻易安装在任何桌面上而省购专用工作台架。

使用范围：

锂电池：可充电池的生产组装焊接，维修焊接。

移动电源：充电宝生产组装

五金工件的焊接

附件：脚踏控制器一套

选配件：工作台，桌面手控放电制

电气参数

电源电压：AC 220±20V

功率：1.5KW(瞬时峰值)

单脉冲时间：0.5-5ms（可调）

双脉冲时间：1ms-10ms（可调）

16脉冲时间：0-80ms（可调）

797Micro-computer Pedal control spot welder

Characteristic

1.Spotwelding rapidly(0.5~5ms) thanks to micro-computer chip with fine control.

2.Thinnernickel pieces（0.03~0.06mm）can be welding by single pulse rapidwelding model

3.Threewide rang pulse choices-single pulse,double pulses,sixteen pulses

4.Thickworkpieces are suited to be spot welding by adding rotatory rapid currentselection regulator.

5.The hangingarm tye(adjustable height) foot-operated spot welding control system is solight that will make you feel convenient.

6.Theworkpieces which being manufactured will become convenience and the solderconnections will become more firm by using professional pressure regulatingdevice of welding needle.

7.Externalspot welding discharge desktop switch is allowed ,so that welding pin in placewith independent control of spot welding discharge

8.The Americaalumina alloy welding needle longevity is being used, so the spot welding sparkwill splash gently and the welding work will be more reliable

9.It can beeasily installed in any desktop without purchasing special work bench.

Range of application

1.Lithiumbattery : The product welding and repair welding of rechargeable battety

2.mobilepower:The production of Charge Pal

3.Thewelding of metal workpiece

Optional accessories: Work bench, Desktopmanual discharge switch

Electrical data:

SupplyVoltage:Power 1.5kw(Instantaneous )

Timeof Single Pulse :0.5 ~5ms (Adjustable)

Timeof Double Pulses 1 ~10ms (Adjustable)

Timeof 16 Pulses 0 ~80ms (Adjustable)

One year warranty