百亨电子(深圳)有限公司
主营产品:
2023年11月24日 12:10
类型 |
功率电阻箱 |
测量范围 |
0-200(Ω)(Ω) |
准确度等级 |
1%,5%,10% |
外形尺寸 |
根据客户需求定制()(mm) |
技术参数:
功 率:4KW~50KW
使用电压:DC或AC(三相或两相可根据客户要求定制)
绝缘电压:≥3KV
表面温度:≤70℃
防护等级:IP54
适用范围:该类电阻箱广范用于制动电路及吸收电路
尺 寸:可以根据客户要求设计或根据我司现有尺寸
特点: 该电阻体积小,功率大,散热好,外加防护罩,能在室
外较恶劣环境下是使用●表面温升
Surface temperature rise (chassis installation)●额定功率递减图
Ambient temperature and power derating cure
●电气、机械特性Electrical and mechanical characteristics
特性
Characteristics规格值
Standards试验方法
Test methods阻值误差
Resistance tolerance±1%(F)±2%(G)±5%(J)±10%(K)阻值测试仪测量
Testing by the resistance testing instrument温度特性
Temperature coefficient300ppm/℃常温Room temperature+100℃短时间过负荷
Short-time loadΔR≤1%U=,5秒seconds
绝缘阻值
Insulation resistance1000MΩ,min接线柱与支架壳之间的电阻值
The resistance between the terminals and the bracket耐电压
Dielectric withstanding voltage无机械损伤及无绝缘层破损
no evidence of mechanical damage or insulation breakdown
ΔR≤0.2%接线柱与支架壳之间60秒承受的电压值The 60 seconds Max. insulation voltage between the terminals and the bracket振动
Vibration无机械损伤
no evidence of mechanical damage
ΔR≤0.2%XY方向各2小时2hours each
频率frequency 10~55Hz
振幅amplitude 1.5mm可焊性
Solderability焊锡面积覆盖率85%以上
The soldering area is over 85%245℃3秒seconds
●耐候特性Environmental charactaristics
特性
Characteristics规格值
Standards试验方法
Test methods耐热性
Heat resistance无机械损伤
no evidence of mechanical damage
ΔR≤0.5%200℃2小时hours耐湿性
Humidity无机械损伤
no evidence of mechanical damage
ΔR≤0.5%40℃95%RH
500小时hours耐湿负荷寿命
Load life in humidity无机械损伤
no evidence of mechanical damage
ΔR≤0.5%40℃95%RH
U=0.1,90分钟minutes ON, 30分钟minutes OFF, 500小时hours负荷寿命
Load lifeΔR≤3%U=,90分钟minutes ON, 30分钟minutes OFF, 1000小时hours不燃性(过负荷)
Flame retardant不燃烧
no evidence of flaming or arcing1~6倍的额定功率
1~6times rated power load
联系方式