CTcP plate

分辨率高、网点光洁、耐印力高 目前，正常情况下，PS版的耐印率一般在 10万印左右，经过烘烤的PS版耐印力可提高 3－ 5倍，达到 30万一 50万印 Model No. Type Usage JM-Ⅱ High- sensitivity positive PS plate Suitable for all kinds of printing, baked plate can be used for UV printing JUVP High- sensitivity positive plate to 405 nm light Suitable for CTcP JMTP-Ⅰ Thermal positive CTP plate No-baked plate: conventional printing Baked plate: conventional printing and UV printing JMTP-Ⅱ Resistant-UV-ink thermal positive CTP plate Conventional printing and UV printing Features Specifications: PS PLATE Specifications of PS PLATE: Aluminium Thickness: 0.15-0.40mm Aluminium Width: Less than 1400mm Application: books, periodicals and top grade color print Alloy aluminium alloy : 1050H18 Sensitivity: high Coating: green Run length: 50,000-120,000 Run length is always dependent on exposure, developing, processing and printing conditions Properties: (1)Moderate grain Multilayered complex grain structure is formed on the surface of substrate through electrolysis graining and a series of chemical and electric-chemical methods. The formed grains are fine and full and could reach the multilayered structure to a great degree, which ensures more excellent dot reproduction and quicker ink-water balance. (2)High resolution Special ingredients, together with the optimally distributed formular weight of the binding of polymers in the coating of SHP-I offer fine dots with sharp edges and reproduce images with rich tone. (3)Long run length Specially selected colophony in the coating of SHP-I significantly increases the press life of the plates. (4)Excellent hydrophilicity Hydrophilic treatment is adopted on the basis of oxidization. By this process, quick ink-water balance, low consumption of water are abtained and the time of checking and adjusting of plates during printing is also shortened down. Moreover, normal contaminations at shut-down time during printing are avoided thoroughly. (5)Excellent chemical resistance Unique coating recipe offers excellent durability and chemical resistance (6)Air eduction layer Electrostatic spray technique is adopted during the production, which helps keep better contact between films and plates. Therefore, shorter vacuuming time and better exposure of flat meshwork are achieved. (7)Available sizes: Sizes are available on buyers' request