冷冻定型机

名称冷冻定型机型号TURBO FROST2说明 涡流式急速冷冻定型机(TRUBO FROST)使用於压底後，具有以下功能：

The TRUBO FROSTsystem,which is used after the sole pressing, carries out the following functions:

1、楦头上鞋面的冷度设定。

COLD SETTING OF THE UPPER ON THE LAST

特?c/CHARACTERISTICS

1、保温好：出入口各有5层保温棉，保温效果绝佳，风道一次成型。

Excellent insulation：There are five layers of insulating cotton at both exit and entrance with excellent insulating effects ,and one-time forming can be achieved in the suct.

2、制冷强：采用涡流式风流，热交换效果绝佳，制冷效果好。

Powerful refrigeration：Turbo air flow is adopted with high heat exchange rate and excellent refrigerating effects.

3、耗电低：在短时间内迅速达到 0°C 以下温度。

Low power consumption：Temperature power than 0°C can be quickly obtained within a short period.

4、产量高：冷冻系统采用涡流式原理，在低温下风扇马达还能高速运转，切入冷风，渗透鞋面，节省时间，提高产量。

High output：The refrigeration system adopts the turbo principle;the fan motor can still running at high speed even under low temperature;cold air is blown in to penetrate the vamp;hence it can save time and increase output.

5、安全性佳：按照国际CE标准规范制造，故障率低。

Small overall dimensions：It occupies little space,is easily movable,and is equipped with safely protection device.

6、体积小：不占空间，易於移动，有安全保护装置。

Excellent reliability：It is manufactured according to the international CE standards with low failure rate.

-所有电子组件均符合目前 ECC标准-

All electrical components comply with the current EEC standard