消防应急灯LED插电左向右向安全出口指示牌疏散指示灯楼层标志灯

Please read the instruction before installation,please keep for reference

Emergency light instruction manual

Product introduction

This product is suitable for public places and high-rise buildings, such as hotels, stores, restaurants, residential building, etc; in the case of fire, earthquake or other unexpected accident,it can guide the crowd follow the correct direction safety evacuationLight source

Input

Power

Battery

Discharge duration

Recharging

Environment temperatureLED

AC220V-240V 50/60Hz

2W

NI-CD1.2V/700mAh

Over 3 Hours

24 Hours

5℃-- 50℃Instructions

After the automatic emergency lighting is installed correctly ,and the connect power meet the requirements,it can be put into use.

G :When connect to the AC,the green indication is ON,.It is provedthat light input normal

R:the red indication ON When connect to the AC ,the battery is charge normal.

Y:the yellow indication is ON.(There are several reasons 1.the battery don’t fix in the light or the batter wires bad contact 2. AC insurance tube open circuit.3. Battery failure 4. Light source all damage or bad contact.

TEST BUTTON:Simulation electric power supply failure copy button.When you press theTESTbutton.the light will be ON.and the light don’t have the problem.

Maintenance

Fire emergency light use high performance nickel cadmium rechargeable batteries. customers shoule pay attention to the following things:1. Test the lamps once for every 90 days,test methods:continuous press the test button for ten time,to check the circuit switching and battery emergency function.2. If the fire emergency light will not use for long time,it should be stored in dry and ventilated place,Every three months,charge the batteryonce;connect the power for 24 hours and then storte the product(the battery will slowly discharge)3. Fire emergency light has a backup battery,When you need to replace,just open the lamps to charge directly,please make sure the specifications of the battery should be the same as the original.4. If you need to charge the light source,should open a lamps,remove the light source components,and then replace the proper light source components

All the emergency lighting that produced by our company,form the date of shipment,under normal working condition,we provide two years free warranty,and life long after—services.