魔爵M3 广告魔方三阶批发专业比赛竞速顺滑智力玩具MJ6201

魔爵M3作为该品牌的首款魔方，拥有较多的创新之处。独特的圆方中心配合中心块底部圆弧切割面，在为魔方带来更大容错的同时稳定性也能得到很好的保证。合理使用圆角搭配，减小角块卡角处的圆角，极大程度减少转角的发生。并设置有防粘槽及轨道，保证长时间使用依旧能有良好手感！

M3 is the first product of MoJue brand, which has a great innovation. Unique round-square center combines with arc surface on the bottom, brings a good stability and corner-cutting, decreasing the frequency of corner-twist. Anti-sticky concave and track make the puzzle has a long working life.

圆方中心

Round-square center

M3的亮点是使用了创新的圆方中心结构，内部稳定性更强，可以让棱块的圆角做到更大的情况下保证更强的稳定。

Innovative round-square center makes the inner part of this puzzle more stable, round on the edge piece can has a good stability.

中心块圆弧切割面

Arc surface on the center piece

对于中心块的创新不仅仅是如此，在卡角圆柱面相邻角位置，传统的三阶结构是直接的倒圆角，这样做会在使用到逆容错的时候产生手感生硬的情况，M3将这个小细节改为为圆弧切割面，减少内部碰撞，逆容通过时更加舒服。

On the adjacent corner of cylinder feet, M3 has an arc surface, which can decrease the inner components collision.

更强的防转角性能

Better anti corner-twist effect

防转角是衡量一款三阶的硬性指标，M3在以往的设计中吸取到了更好的灵感，并实现突破！通过保留最普通三阶的棱块卡角宽度，将中心块链接中心轴部分的圆柱缩小，使角块的卡角圆角能做得更小，在暴力扭转过程中棱块卡角会将角块卡角死死的压住，起到了防止转角的效果。

It is a breakthrough on the anti corner-twist effect of M3, it keeps original edge feet and minimize the pole part of the core, then the round on the feet of corner piece can be smaller, which can decrease the frequency of corner-twist.

中心柱上移

中心块采用中心柱上移技术，在保证中心块稳定性的同时，释放更大的卡角空空间，以提供更强的正容错。

Higher central pole

Higher central pole brings stable centre pieces and outstanding corner cutting.

高强度轴心

轴心采用4.5mm的细轴心，12片加强筋保证轴心的垂直度，配合比传统螺丝更细的加硬版2mm螺丝，提供更长的卡脚，保证稳定性的同时增强了防POP能力。

High strength core

The diameter of the core is only 4.5mm, 12 strengthening ribs insure its verticality, enhanced 2mm screws bring longer feet that make the cube has a good stability and anti-pop ability.

合理的角块圆角

Proper round on corner piece

角块设计大了以后，逆容错会跟着增加，但伴随而来的是稳定性也会越差，通过测试后，将M3非必要使用圆角的部分做成无倒圆的设计，同时剩余的部分能很好的起到增加摩擦面积从而增加的稳定性。模具上使用摩擦面抽芯的方法，达到了全封闭的效果，避免镂空结构带来的噪声问题。

Once the corner piece becomes bigger, inverse corner-cutting will also increase, but the stability of the cube will decrease. After investigation, M3 uses non-circle design, which makes the cube has a good stability. The mould uses friction surface core pulling method, to reach a fully closed effect, avoiding the noisy sound.

防粘泻处理

Anti-sticky design

中心底部使用四角星弧面凹槽，减少摩擦力；棱块卡角部分加入了条形凹槽，与中心的四角星弧面相对应，形成中层卡角部分完整的轨道凹槽，

4-angle star arc concave on the bottom of center piece can decrease the friction. Bar concave on edge feet makes a complete track concave on middle feet part.

棱块侧面保留了完整的摩擦圆之后其余的部分切去，形成一道轨道，减少接触面积

The side of edge piece keeps complete friction round and remove other parts, creating a track to decrease the contact surface.