汕头市澄海区魔域文化有限公司
主营产品:
2023年12月16日 10:38
包装方式 |
彩盒 |
加工定制 |
是 |
品牌 |
洋葱设计 |
货号 |
YC6105 |
产地 |
广东 |
规格 |
5.8x5.8x5.8cm |
加工方式 |
logo贴牌 |
建议零售价 |
¥55.00 |
是否专供外贸 |
否 |
3C配置类别 |
14岁以下的塑胶玩具 |
商品3C认证码 |
2016152203016973 |
颜色 |
黑,白,荧光六色 |
玩具类别 |
其他玩具 |
魅辰斜转魔方在原有魔域斜转的基础上进行改进,加大各棱角块的圆角,提升容错性能。设计了全新的定位弹力可调系统,改进了以往斜转魔方弹力不可调的缺点,使魔方定位弹力能够根据自己的喜好,轻松高效地调节。并使用了独特的六色拼合结构,为魔方提供六色版本,以适应更多人的需求。
Meichen Skewb is a improvement on the basis of original MoYu skewb, which has bigger round on edge and corner pieces to improve the corner-cutting effect. Newest adjustable elastic system makes the puzzle more easy to modify. Unique split structure makes stickerless version available.
拥有更大的圆角
Bigger round
魅辰斜转在保证旋转稳定性的前提下,尽可能得增大了各个块的圆角值,使得逆容错以及逆易容性得到更好的发挥,在竞速中更能取得优势。
On the basis of stability, bigger round on each piece makes the puzzle has better corner-cutting.
六色拼接结构
Stickerless split structure
角块的三瓣式拼接使魔方颜色拥有六色的色彩版本。其中,角块的三瓣拼接采用了与魅影类似的“卡脚一体,外盖三瓣”式的拼接方式,杜绝了拼合缝隙对于旋转稳定性的影响。同时,这种拼接造成的角块底部的孔位巧妙地成为了定位弹力可调机构的一部分。
3-piece combination used on corner piece makes the stickerless version available, unified feet on corners avoid bumpy feel. Meanwhile, Holes on the bottom makes the elasticity adjustable.
定位弹力可调
Adjustable localization elasticity
这款斜转改进了传统钢珠结构定位弹力不可调的缺点,在结构上充分利用了角块三瓣拼接留下的孔位,设计了全新的定位弹力可调系统。通过调节螺丝的松紧,楔形块可以相对角块上下位移。楔形块位置不同,楔形面伸入弹簧仓后部的深度也不同,通过这种方式对弹簧压缩长度进行调整,达到定位弹力调节的作用。
Holes on bottom of the corner piece make the puzzle adjustable. By adjust the elasticity on the screws, wedge blocks can move up and down. By adjust the length of springs to make the elasticity adjustable.
这种全新的调节方式拥有两大优势:
2 advantages on the adjustment pattern:
1.调试方便;只需将魔方的块拆开,就可以方便地调节弹力,不必更换弹簧,也不必把装有定位钢珠的零件拆分开,且一共只需调节4根螺丝。
1. Easy to adjust: You just need to disassemble the puzzle to adjust the elasticity, no need to swap springs or take out the balls, also only 4 screws need to adjust in total.
2.一个角块中的三根定位弹簧同时被调节,并保证其弹力是完全一致的,不会出现有的钢珠弹力偏大,有的则偏小。
2. 3 localization springs can be adjusted at the same time, so the elasticity is completely the same.
大棱块新的拼接方式
New combination pattern on big edge piece
新斜转的大棱块采用了三个零件拼合的方式,摩擦面更完整,没有以往为了防止塑料缩水而不得不挖的各种镂空,塑料件形变更小,转动过程中更为平稳。
3-piece combination pattern on big edges makes the friction surface more complete, decreasing the deformation and bringing a more stable feel.
联系方式