供应新人造板纸张浸渍机械 二次浸渍覆涂干燥机 优科出品

UM系列设备为人造板二次贴面纸，防火板装饰纸，防火板地层纸，三聚氰胺装饰纸，地板装饰纸，平衡纸，三氧化二铝耐磨纸，酚醛胶建筑模板纸等进行连续高精度浸渍干燥剪切的自动化生产线.

设备标准配置Basic Configuration of Impregnators

Turret or Fixed unwinder旋式或固定式开卷机Impregnation station浸渍站1stdryer section一次干燥段1stair cooling Zone一次风冷区Coating station (gravure or metering roller)网纹辊或计量辊涂布站2nddryer section二次干燥段2ndair cooling Zone二次风冷区Web Alinger纠偏装置Water cooling station拉纸机Rotary Servo cutter伺服切纸机Belt conveyer皮带输送Auto Stacker system堆垛系统

可选配置Options

Liquid corundum（AL2O3）coater三氧化二铝涂布装置Lacquering unit油漆机Rewinder收卷机Cutting Symbol tracing device同步对花切割装置Auto Scraper device自动刮边系统Resin mix自动调配胶系统

原纸宽度Raw paper width1220-2500 mm工作速度Working Speed>25m/min ( based on the capacity of dryers )车间要求Workshop space60m*6m*6m (L*W*H)纸张离地高度Web height from ground (inside ovens)1.250 mm

胶水种类Resin (Impregnation) type三胺，尿胶，苯酚胶MF/UF/MF UF mixed胶水固含量Resin Solid Contents约45-65% approx 45-65%%上胶量Resin pick-up60-270%上胶均匀度Resin pick-up profile<±1%挥发份Volatility6.0 - 7.5%电源供给Power supply3ph-AC380V@50HZ, 1ph-AC220V安装功率Total installation power75-140KW实际运行电耗Power consumption in operation60-80% of total installed power

60-80%之安装功率安装热容量Installed heating capacityApprox 0.5-1.0M Kcal/h实际热消耗Heat consumption in operation60 - 80% of installed heating capacity

60-80%之安装热能加热介质Heating mediumThermal oil, Steam，Super-Heated Water

导热油，蒸汽，过热水压缩空气消耗Compressed air required1.5m3/min,0.6Mpa冷却水消耗Cooling water requiredapprox 3m3/h, 0.4Mpa at 18º C