开源硬件 3D打印机配件 喷嘴 J Head

版的MKV新鲜上市！

RepRap J-Head MKIV Hotend Nozzle

/J_Head_Nozzle#Mk_IV(链接复制到浏览器地址栏打开)

Net Weight：35g

Part list as Below:

零件清单如下，修改部分为红色字体。

There are 4 kinds:For 3mm diameter filament, Nozzle is 0.5mm diameter.For 3mm diameter filament, Nozzle is 0.4mm diameterFor 1.75mm diameter filament, Nozzle is 0.5mm diameterFor 1.75mm diameter filament, Nozzle is 0.4mm diameter

QuantityPartDescriptionRemark1J-Head Nozzle (v1.x)MachinedAluminumNozzle/Heater Combination, Version 1.xModified size，fromImperial to Metric1Nozzle Holder (v4)Machined PEEK Nozzle Holder, Version 4Modified size,fromImperial to Metric1PTFE liner3mm ID, 6mm OD PTFE tubing for 3mm diameter filament

or 2mm ID, 3mm OD PTFE tubing for 1.75mm diameter filamentFit the Nozzle and the holder1heat cartridges6mm diameter, 20mm length, 12V 30~40Watts, 1m wires1Thermistor100KB=39501Hollow-lock socket set screwM3hollow-lock socket set screwFit the Nozzle,fromImperial to Metric1Support WasherOptional 1/2" Fender WasherDo not include this one