供应VHDTV X3DVBS2+IPTV

Basic Signal Troubleshooting Guide HD X31. NO SIGNALA. Check the power and connection between the IRD and Television set.-Set the connection properly.B. Check the IRD if working.-If the IRD is not working or defective, replace the IRD.C. Check the IRD settings-Re-program the IRD settings. Make sure that LNB frequency is matched to IRD set-up.D. Set the IRD to manual scanning and check the display of signal strength and signal quality.-If no signal quality appears in the manual scanning mode, re-focus the satellite dish.E. Check the weather condition.(Heavy rains and heavy cloudy sky can also interrupt satellite signal transmission.)-Check with our Head-end or check the area of receiver. 2. SIGNAL PIXELIZATIONA. Check the signal strength and signal quality if in maximum level.-If the signal is in low level, re-focus the satellite dish to get the maximum signal.B. Check the weather condition. Heavy rains and heavy cloudy sky can also interrupt satellite signal transmission.-Check with our head-end or check the area of receiver.3. WITH SIGNAL BUT ONLY 1 CHANNEL SHOWINGA. Deactivated Account or IRD.-Check the account of the subscriber.-Request to reactivate if the account has been updated.-If newly installed, request for activation if the payment has been made.B. Check the smart card.-Smart card should always be inserted in the IRD.C. Check chip set pairing.-IRD chip no. is always paired with the smartcard number.

Overview HD X3 1

1. Front Panel

CH+Normal ModeChange to the next channelMenu ModeMove to the upper itemCH-Normal ModeChange to ht previous channelMenu ModeMove to the lower itemVOL+Normal ModeVolume upMenu ModeChange itemVOL-Normal ModeVolume downMenu ModeChange itemPowerTurn Power ON/OFF of the receiver

2. Rear Panel

Digital TunerRF INConnect to the satellite dishUSBUSBSupport Multi-Media & PVR, software upgradeHDMIHDMIConnect to the TV with HDMI cableSPDIFSPDIFDigital Audio OutputYPbPrYPbPrComponent Output(Video)EthernetLANRJ-45(to Ethernet)

This receiver has been manufactured to comply with the International Safety Standard.Please read all of safety and operating instructions before operating the product and keep this manual for future reference.

MAIN POWER SUPPLY * AC100-240V50-60Hz

Operate your product only from the type of power supply indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your local power company. Disconnect the STB from the mains before your start any maintenance or installation procedures.

OVERLOADING

Do not overload a wall outlet, extension cord or adapter as this may result in electric fire or shock.

LIQUIDS

The product should not be exposed to any liquids such as dripping or splashing. No objects filled with liquids, such as vases, should be placed on the apparatus.

CLEANING

Before cleaning, disconnect the product from the wall outlet. Use a cloth lightly dampened with water (no solvents) to clean the exterior.

VENTILATION

The slots on top of the product must be left uncovered to allow proper airflow to the unit. Do not stand the product on soft furnishings or carpets. Do not expose the product to direct sunlingt and do not place it near heater. Do not stack electronic equipment on top of the product.

ATTACHMENTS

Do not use any attachment that is not recommended by the manufacturer, it may cause a hazard or damage the product.

CONNECTION TO THE TV

Disconnect the product from the mains before connecting or disconnecting the cable from the aerial antenna. Failure to do so can damage the TV.

LOCATION

Place the product indorrs in order not to expose to lightning, rain or sunlight.Do not install near any heat sources such as radiators, heating devices, stoves, or other apparatus (including amplifier) that produce heat.

LIGHTNING or NOT IN USE

Unplug the product from the wall outlet and disconnect the cable during a lightning storm or when unused for a long time.

SERVICINGDo not attempt service the product yourself, as opening or removing covers may expose you to dangerous voltage or other hazard. Refer all servicing to qualified service personnel.◆Support MPEG-2, MPEG-4, and fully DVB-S/S2 compliant, Full HD◆H.264 MP@ML, MP@HL, MP@L4.1, HP@L4.1XVID, DivX, AVS JIZHUN@6.2, VC-1

◆Video solution 1080p, 1080i ,720p,576p,576i, 480p, 480i

◆Audio decoding: MP1/2/3,AC3, AAC-LC, HE-AAC audio streams

◆DiSEqC1.0, 1.1, 1.2 and USALS

◆OSD in many language

◆Unlimited program memory

◆EPG for on screen channel information

◆Multiple Video outputs(HDMI, CVBS, YPbPr)

◆2 x USB2.0 Host (access to HDD, USB memory for PVR and USB WIFI)

◆Upgrade software& channel date base through USB

◆Smart card reader x1

◆Ethernet: 10/100Mbs, DHCP support

◆Youth Protection

◆Network DDNS Support,GPRS USB paring for internet

◆Internet Radio

◆Youtube free Video availability ,later for more after update software .

◆Playing Satellite Channels through Computer(Windows Only)

◆Local Weather report

◆Build In Web Server

◆Remote Control By Mobile Phone Though Local Network (Web)

◆ADSL/CABLE WIFI Router

◆Automatic Software Update by Internet and Satellite

◆Playing Photo/Video from Android's phone to Receiver by Local network (soon availability)

◆Internet Sharing(CCCAM, NewCAM, MGCAM, CAMD3, KAP(Our VPN Private Cam))​