无锡竞成机械有限公司
主营产品:
2023年08月02日 16:29
品牌 |
竞成轧机 |
型号 |
130-500*700 |
重量 |
85(t)(t) |
品牌/型号 |
竞成轧机/130-500*700 |
Technical parameter
Φ130/Φ500ⅹ700 Four-roller Reversing Cold Mill Set
Ⅰ. Rolling requirements:
Material: stainless steel 430
Material feeding thickness: 3.0mm Feeding width: 600mm
Finished thickness: 0.3mm Finished width: 600mm
Rolling speed: V≤120m/min
Rolling pressure: 350T
Ⅱ. Equipment configuration:
Mainframe: Φ130/Φ500ⅹ700 four-roller cold mill
(1) Press device:
1. Electric pressing motor 15KWⅹ2 sets (6 poles)
2. It is possible to press and lift at the same time, and also separately.
3. The pressed worm wheel device consists of a 2ndenveloped torus wheel and worm with center distance of 360 mm and mode number of 14.25mm
4. The pressed screw bolt is B180ⅹ8, material: 40Cr.
5. The material of worm box: ZG270-500.
(2) Frame assembly:
1. Two closed archway (cross section of upright column: 270ⅹ320mm)
2. Equipped with imported press plate
3. Equipped with carrier roller device
4. Upper rolling system is spring balanced.
(3) Roller device:
1. Working roll diameterⅹrolling surface widthΦ130ⅹ750 Material: 9Cr2Mo
Inner rolling bearing is applied.Backing roll diameterⅹrolling surface widthΦ500ⅹ700 Material: 9Cr2MoFC 5884300 bearing is applied.Lubrication solution: greaseRoller changing method: manual changing (equipped with roller rail)
(4) Main driving:
1. Driving method: backing roller driving
2. Main electric motor: Z4-355-42 N=355KW n=500/1200r/min
3. Main reducer: ZL115 (with lube way pipelines)
4. Herringbone gear box (steel): A=760mm Mn=12mm (with lube way pipelines)Cross universal spindle (with spindle bracket) SWC315WH
Ⅲ. Sleeved type pull reel 2 sets
1. Sleeve dimension: Φ500ⅹ750mm
2. Electric motor: Z4-280-32 N=160KW n=750/1700r/min
3. Center distance of reducer: JZQ100
4. Max. reel weight: 7000kg
5. Max. tension: 7T
6. Equipped with rotary rocker bracket.
Ⅳ. Electric control system:
Euro 590 digital dual-bridge and four-quadrant weak ic speed regulator, control method with constant tension, relay control and PLC.
Ⅴ. Installation and debugging:
Supplier: Wuxi Jingcheng Machinery Co., Ltd Demander:
Oct. 31st,2011
联系方式