广东国利先进复合材料研发有限公司
主营产品:消音降噪设备
2024年01月06日 16:52
品牌 |
广东国利 |
货号 |
GL-3000-430 |
材质 |
应用于海底高性能低密度的复合泡沫塑料 |
密度 |
430 Kg/m³ |
肖氏硬度 |
65 °D |
抗拉伸强度 |
20MPa |
Document description (文件描述)technical datasheet (技术数据表) Material description(材质说明)High performance low density syntactic foam for subsea buoyancy applications. (应用于海底高性能低密度的复合泡沫塑料) Property (特性,属性)Value(数值)Units(单位)Test methodColour 颜色Maximum operation depth @10℃(最大运行深度)3000MSWMaximum operation pressure @10℃(最大运行气压)4785PsiCured density(metric)密度(米)430Kg/m³BS ISO 1183‐3:1999Shore hardness 肖氏硬度65°DISO 868:1998Tensile Strength抗拉强度20MPaBS EN ISO 527Elongation @ Break断裂延伸率1%BS EN ISO 527Tensile Modulus拉伸模量12MpaBS EN ISO 527Uniaxial Compressive Strength 单轴抗压强度26MpaASTM D695‐02aUniaxial Compressive Modulus单轴压缩模量1.7MpaASTM D695‐02aShear Strength剪切强度16MpaASTM D732‐02Bulk Modulus体积压缩模量1.7MpaASTM D2926Glass Transition Temperature玻璃转变的温度>105℃BS EN ISO 113 57‐2Coefficient of Thermal Expansion热膨胀系数3.6Ppm/℃ASTM E 228‐95Hydrostatic Crush Pressure破坏进水压>5510PsiASTM D2736(ii)Water Absorption吸水率< +2%ASTM D2735Standard Available Dimensional Size可行性标准规格750*500*150 500*500*150(i) General manufacturing tolerances of ± 32 kg/m3 or ± 2 lb/ft3 apply(i)适用于一般制造业的公差是32公斤/立方米或者2英磅/ft3.(ii) Performed at maximum operational pressure for 168 hours at 23°C on Ø25.4mm, 50.8mm long test specimens。Ø25.4mm, 50.8mm长的样品在23℃下最高运行压力了168个小时。Issued byIssue dateChecked byCheck date The information given within this document is of a general nature only. The values given must be considered as typical and do not constitute a product specification. No liability for loss or damage can be accepted by GDGL. Unless others wise stated, all properties are quoted at ambient conditions. All information contained herein is the propriety information of GDGL and must not be copied or disclosed to any other party without the prior written permission of GDGL. The information contained herein must only be used for the Specified Purposes for which it was provided.本文件提供的资料只属一般性质。所提供的数值必须被认为是典型的,并且不构成产品规格。任何损失或者损害的赔偿责任都不能被GDGL.接受。除非另有证明,所有的属性都是在环境条件下引用的。本文件所包含的所有信息均为GDGL.相关信息。未经GDGL.的书面许可。不得将其复印或外泄给任何其他地方。本文件所包含的信息只可用于所提供资料的制定用途。 材料说明: 本产品所使用的主要材料如下:改性环氧结构粘接剂,高性能玻璃微珠,高性能陶瓷微珠,以及相关改性相容产品。国内部分案列:曾供给,中船重工,中国航天科工集团,西北工业大学,深渊研究院,九一三八八部队,等。
联系方式