国利 厂家供应 海洋浮力材料 GLB01 海洋工程应用材料

Document description （文件描述）technical datasheet （技术数据表） Material description（材质说明）High performance low density syntactic foam for subsea buoyancy applications. (应用于海底高性能低密度的复合泡沫塑料) Property (特性，属性)Value（数值）Units（单位）Test method Model型号，Colour 颜色GLB01碳钎维大球填充Maximum operation depth @10℃（最大运行深度）1000MSWMaximum operation pressure @10℃（最大运行气压）1450PsiCured density（metric）密度（米）360Kg/m³BS ISO 1183‐3:1999Shore hardness 肖氏硬度30°DISO 868:1998Tensile Strength抗拉伸强度8MPaBS EN ISO 527Elongation @ Break延伸率1.2%BS EN ISO 527Tensile Modulus拉伸模量%BS EN ISO 527Uniaxial Compressive Strength 单轴抗压强度14MpaASTM D695‐02aUniaxial Compressive Modulus单轴压缩模量1MpaASTM D695‐02aShear Strength剪切强度6MpaASTM D732‐02Bulk Modulus体积压缩模量1MpaASTM D2926Glass Transition Temperature玻璃转变的温度>100℃BS EN ISO 113 57‐2Coefficient of Thermal Expansion热膨胀系数5.5Ppm/℃ASTM E 228‐95Hydrostatic Crush Pressure破坏进水压2175>PsiASTM D2736(ii)Water Absorption吸水率< +2%ASTM D2735Standard Available Dimensional Size可行性标准规格750*500*150 500*500*150(i) General manufacturing tolerances of ± 32 kg/m3 or ± 2 lb/ft3 apply(i)适用于一般制造业的公差是32公斤/立方米或者2英磅/ft3.(ii) Performed at maximum operational pressure for 168 hours at 23°C on Ø25.4mm, 50.8mm long test specimens。Ø25.4mm, 50.8mm长的样品在23℃下最高运行压力了168个小时。Issued byIssue dateChecked byCheck date The information given within this document is of a general nature only. The values given must be considered as typical and do not constitute a product specification. No liability for loss or damage can be accepted by GDGL. Unless others wise stated, all properties are quoted at ambient conditions. All information contained herein is the propriety information of GDGL and must not be copied or disclosed to any other party without the prior written permission of GDGL. The information contained herein must only be used for the Specified Purposes for which it was provided.本文件提供的资料只属一般性质。所提供的数值必须被认为是典型的，并且不构成产品规格。任何损失或者损害的赔偿责任都不能被GDGL.接受。除非另有证明，所有的属性都是在环境条件下引用的。本文件所包含的所有信息均为GDGL.相关信息。未经GDGL.的书面许可。不得将其复印或外泄给任何其他地方。本文件所包含的信息只可用于所提供资料的制定用途。