厂家直销USB2.0 千兆网卡

该USB 2.0千兆网卡以太网适配器是一个符合成本效益的解决方案，转换成1个10/100/1000Base-T以太网端口，一个USB端口。它使成本低，负担得起的千兆以太网网络连接到台式机，笔记本电脑和嵌入式系统使用流行的USB端口。不需要购买昂贵的千兆网络接口卡和腾出一个PCI或CardBus插槽，只需使用您现有的USB端口，您可以升级您的网络连接速度。

产品介绍: 1 . 支持10/100/1000Mbps自适应网速模式 2 . 支持MDIX(自动识别直通网线和交叉网线) 3 . 支持USB高速和全速模式 4 . 符合IEEE802.3/802.3u/802.3ab(10Base-T/100Base-TX/1000Base-T) 5 . 在快速以太网下支持全双工和半双工操作 6 . 支持达9KB的巨型数据包 7 . 支持暂停模式和远程唤醒 8 . 即插即用安装 9 . 吸塑包装 10. 网络标准:IEEE 802.3, 802.3u and 802.3ab 11. 数据:USB总线方式 12. LED指示:1000Mbps 13. 电源:2.5-3.3伏 14. 网络接口:支持MDIX的RJ 接口(母) 15. 全双工:10 BaseT, 100Base Tx, 1000BaseT 16. 半双工:10BaseT, 100BaseTx 17. 内存:嵌入式20KB RX SRAM+20KB TX SRAM 18. 环境温度:0°to 70° 19. USB2.0高速传输 20. 支持系统:Win 98SE, ME, 2000, XP, Vista / WinCE Description: This USB Lan is a cost effective solution that converts a USB port into a 10/100/1000Base-T Ethernet port. It enables low cost and affordable Gigabit Ethernet network connection to desktop, notebook PC, and e edded system using popular USB ports. No need to purchase an expensive Gigabit network interface card and to spare a PCI or Cardbus slot, just using your existing USB ports and you can upgrade your network connection speed. Features: Supports 10/100/1000 Mbps auto-sensing capabilitySupports Auto MDIX (straight and cross network cable auto-detection)USB specification 1.0, 1.1 and 2.0 compliantSupports USB full and high speed modes with bus power capabilityIEEE 802.3, 802.3u, and 802.3ab (10Base-T, 100Base-TX, and 1000Base-T) compatibleSupports both full-duplex and half-duplex operation in Fast EthernetSupports Ju o packet of up to 9KBSupports suspend mode and remote w eup via link-up and magic packetPlug and Play InstallationSpecificati [table][tr][td]Network Standards[/td][td]IEEE 802.3, 802.3u, and 802.3ab[/td][/tr][tr][td]Data Bus[/td][td]USB[/td][/tr][tr][td]LED Indicators[/td][td]Link, 1000Mbps[/td][/tr][tr][td]Power[/td][td]Integrates on-chip 3.3V to 2.5V voltage regulator and requires only single power supply: 3.3V[/td][/tr][tr][td]Network Interface[/td][td]Female RJ jack supporting Auto MDIX[/td][/tr][tr][td]Full Duplex[/td][td]10BaseT, 100BaseTx, 1000BaseT[/td][/tr][tr][td]Half Duplex[/td][td]10BaseT, 100BaseTx[/td][/tr][tr][td]RAM[/td][td]E edded 20KB SRAM for RX packet buffering and 20KB SRAM for TX packet buffering[/td][/tr][tr][td]Operating Temperature[/td][td]0°C to 70°C[/td][/tr][tr][td]Operating System Support[/td][td]Windows 98SE, ME, 2000, XP,Vista, Linux and MAC OS X[/td][/tr][tr][td]Certification[/td][td]FCC, CE[/td][/tr][/table] System Requirements: Pentium III 800MHz or faster PC with USB port 2 MB RAM or more Windows® 98SE/ME/2000/XP/Vista Linux 2.4 Kernal or High MAC OS 10.3 or High