三信亚太科技(深圳)有限公司(陈丽霞)
主营产品:
2023年07月16日 09:23
品牌 |
其他 |
型号 |
NOVASCOPE6000 |
测量范围 |
0.13-100 mmmm(mm) |
加工定制 |
否 |
Back to: Thickness Gauges美国NDTSystems, 原NOVASCOPE5000测厚仪升级版
NovaScope 6000Class leading ultra thin spatial resolutionHigh-Resolution (0.0001in, 0.0025mm)Multi-probe capabilityTouchscreen controlsFeatures
Single or Dual Element:
Can use both single & dual probes
Alarm mode:
Alarm mode on limits
Variable Units:
Change between mm/ inch
Multi-Probe:
Can use multiple probe types
Data Transfer:
Can be connected to PC
Adjustable Velocity:
Velocity can be adjusted
Benchtop:
Designed for benchtop use
Adjustable Gain:
Gain can be adjusted
Thru Coating mode:
Can measure through coatings
High Resolution:
Resolution to 0.0001 inches
Min/Max Mode:
Measures max and min thickness0.0001" (0.0025 mm) digital resolution; as low as 0.010" (0.254 mm) thickness resolutionCompatible with contact, delay line or immersion transducersDual-Trace display; A-Trace and gatesDisplays English or Metric unitsVelocity display (quartz-stabilized, digital)Full RF or rectified RF displaySelectable multiple echo intervalReceiver attenuation control plus manual gain and Automatic Gain Control (AGC)TAC (Thickness Amplitude Compensation) for noise suppressionOutputs: Alarms, Analog thickness, USB, Serial RS-232C, Micro HDMISpecificationsDimensional Readout English and Metric
Gaging Range English: 0.005-10 inches;
Metric 0.13-100 mm (depending upon material)Digital ResolutionEnglish Units± 0.0001" on 1" range
± 0.001" on 10" range Metric Units± 0.001 mm on 10 mm range
± 0.01 mm on 100 mm rangeMeasuring Mode Sets mode for contact, delay line or immersion transducersReadout Mode Selects digital display for thickness or velocityPulserRisetime5 ns Amplitude150, 250, 400 volts
Peak into 50 Ohms Repetition rate625, 1250, 2,500, 5000 Hz Damping15 to 520 Ohms - 1 Ohm incrementsReceiverAdjustable gain100 dB Automatic gain control100 dB dynamic range RejectVariable threshold to full scaleBandwidthBandwidth30 MHz (3 dB down)AttenuatorAttenuator0, 10, and 20 dB selectableA-Trace DisplaySweep widthSwitchable down to 50 ns/Div
Continuously adjustable Sweep delay1 ms to 80 ms DisplayDual Trace; A-Trace plus selectable
Gate Traces (IP, IF, T or TAC) Display modesFull wave RF, positive or negative
RectifiedT-Gate Thickness gate with adjustable syncT-Gate Start/Stop Selectable on positive or negative half cyclesIP-Gate 0.25 to 20 ms (contact), 1.0 to 0 ms (continued) (delay or immersion)IF-Gate 0.1 to 8.0 msTAC-Gate Adjustable thickness amplitude
Compensation of gain
Start control: 0.02 to 6 ms
Amplitude control: 0 to 100 dB
Slope control: 0.1 to 50 msAlarms Three functions: LO, HI, LO/HIOutputs Alarms, Analog thickness
Serial RS-232C, IP Sync and USBInputs External syncPower SourcePower SourceBattery & ACPower Consumption 50 WattsWarranty One yearScreenshots
联系方式