深圳迈沃达电子科技有限责任公司

MB Key NEC Programmer

This machine is use for new Benz Smart remote for Benz 220/215/210/202/203/219/211/231....

The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2008 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.You read and program eeprom of CPU from Steering blocking module

Product description

The new Mercedes device working with smart key (old and new) using in car since 1997 up to 2008 - without keylessgo system. You can program new key (ore used) in car and program oun key if its not work more.You read and program eeprom of CPU from Steering blocking module via diagnostic connector (38 pins). Desolder and read via programmer two CPU from Electronic Ignition Control Module.Load theese eeproms to program. Desolder NEC CPU from the key.Soldering it on the device , select the No of key and program it. Solder all CPU on their places and start the car.

You can program new keys without the car - only with EIS and steering blocking module.You can read theese CPU with help programmer (for ex. ETL) for Motorolla CPU 68HC705X16(32).