Active discharge printing paste 闪光拔印

Product name Active discharge printing paste(colored discharge) State Paste 销售热线：罗秋莲 QQ:83569139 Packing 20KG/drum Storage 6 months in cool place Application Suitable for knitting which dyed with active pigment Features 1. High fastness

2. Brilliant for colored discharge, better effect than Italian products.

3. High softness

4. SGS detecting passed, no PVC, no heavy metal, no NPEOs. Mix proportion Discharge printing paste 85-95% + discharge powder 5-8% Printing process 1.Mixing discharge powder, discharge printing paste, pigment and stirring them evenly.

2.Printing for 1 time (3-4 scrapes per time).

3.Baking for 1-3 minutes or hot pressing for 10 seconds under 160-180℃(within 5-30 minutes after printing).

4.Finish. Attentions 1. The pigment is max 12%.

2. Please use up the discharge printing pastes which already mixed with discharge powder, otherwise it'll be not stable for the effect.

3. Don't put the knit discharge powder together with the jean discharge powder, otherwise it'll be on fire.

4. For colored discharge, please mix the discharge printing paste and pigment firstly, then add the discharge powder. 品名 活性拔印浆（彩拔） 销售热线：罗秋莲 QQ:83569139 外观 乳白色糊状 包装 20KG/桶 贮存期 常温下6个月 应用 使用活性染料染色的绵布 卖点 1. 拔白度好，色拔鲜艳

2. 手感柔软

3. 水洗不掉色

4. 符合美国ASTM对邻苯二甲酸脂和欧盟EN71 Part 3对重金属含量的要求 调配比例 彩拔：拔印浆85-95% +拔印粉5-8% + 色浆？% 工艺流程 1. 丝网选用80-100目，用丝印硬方刀75度刮印1次（3刀左右），以印透纤维为佳。

2. 印完后等5分钟左右（不超30分钟）待拔印浆渗透布料

3. 160-180度烘烤1-3分钟或压烫10-25秒 注意事项 1. 对色牢度要求高的产品，加1-2%固化剂可提高牢度

2. 调入牛仔拔印粉的浆料请在8小时内用完

3. 针织拔印粉和牛仔拔印浆不能放在一起，否则有着火的危险！ 销售热线：罗秋莲 QQ:83569319 -86.com/