PCTG 美国伊士曼 TX1001（全国供应）tx1001

Tritan™ TX1001共聚多酯Eastman Chemical Company产品说明：Eastman Tritan™ TX1001 is an amorphous copolyester with excellent appearance and clarity. EastmanTritan™ TX1001 contains a mold release derived from vegetable based sources. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan™ copolyester's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity and aggressive cleaning detergents. Tritan™ TX1001 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Tritan™ TX1001 copolyester is certified to NSF/ANSI Standard 51 for Food E Materials and is also certified to NSF/ANSI Standard 61 - Drinking Water System Components-Health Effects.

Tritan™ TX1001 物性表

基本信息

黄卡编号E118289-100074991添加剂脱模特性共聚物抗撞击性，高可加工性，良好快的成型周期耐化学性良好耐热性，高耐用性清晰度，高韧性良好食品接触的合规性水解稳定脱模性能良好外观良好无定形的用途大型家用电器和小型家用电器电器用具家用货品消费品应用领域机构评级FDA 食品接触, 未评级NSF 51NSF 61加工方法注射成型物理性能额定值单位制测试方法比重 1.18g/cm³ASTM D792收缩率 - 流动 0.50 到 0.70%ASTM D955硬度额定值单位制测试方法洛氏硬度 (R 级, 23°C)112

ASTM D785机械性能额定值单位制测试方法拉伸模量 (23°C)1550MPaASTM D638, ISO 527-2抗张强度

屈服, 23°C 43.0MPaASTM D638, ISO 527-2 断裂, 23°C 53.0MPaASTM D638 断裂, 23°C 58.0MPaISO 527-2伸长率

屈服, 23°C 6.0%ASTM D638 屈服, 23°C 7.0%ISO 527-2 断裂, 23°C 210%ASTM D638 断裂, 23°C 190%ISO 527-2弯曲模量

23°C 1550MPaASTM D790 23°C 1500MPaISO 178弯曲应力

23°C 59.0MPaISO 178 屈服, 23°C 62.0MPaASTM D790冲击性能额定值单位制测试方法悬壁梁缺口冲击强度

23°C 980J/mASTM D256 -40°C 20kJ/m²ISO 180 23°C 93kJ/m²ISO 180无缺口悬臂梁冲击 (23°C)无断裂

ASTM D4812热性能额定值单位制测试方法载荷下热变形温度

ASTM D648 0.45 MPa, 未退火 99.0°CASTM D648 1.8 MPa, 未退火 85.0°CASTM D648光学性能额定值单位制测试方法透射率 (总计)90.0%ASTM D1003雾度 < 1.0%ASTM D1003注射额定值单位制

干燥温度 88.0°C

干燥时间 4.0 到 6.0hr

加工（熔体）温度 260 到 282°C

模具温度 38.0 到 66.0°C