批发PP吹膜机

SJXM—45×30—650mm型PP下吹水冷膜挤出机组

技 术 配 置 规 范

一、 挤出机主电机：三相异步四级电机，功率15KW，LG变频调速，螺杆直径φ45mm，长径比30：1，复合式螺杆结构螺杆材质38CrMoALA,渗氮精加工，硬度840HV以上铸铝加热器，第一区水冷，第二、三区统一风机冷却三轴传动，二级硬齿面挤出机专用齿轮减速箱，对外通冷却水，冷却液内循环，富士牌数显温控表。配自动上料机二、 机头、模具、风环

1.360º连续旋转机头，旋转铜环水平排列

2.螺旋芯棒式机头结构，螺旋体流道、模具与物料接触部面镀硬铬精加工

3.不锈钢加热器

4.模具：φ200mm

5.迷宫式高风压旋转风环，与上列模具适配风环口各一套

6.高度4.5m

The FFS Heavy Duty and Skid-proof Bags

Correction, unwinding,angle adjustableembossing, gusset, Winding line

Technical date

1. The unwinding machine, correction and horizontal, back and forth swing

2. The angle can be vernier regulation adjustable before embossing

3. The roller proceed though special pamameter, the strengthen is very high, the service time is much longer

4. The Collapser is consist of aluminum guider roller

5. The maximum diameter of film roller is 1350mm

6. The speed: 15~40m/min, the frequency controller

7. The tension can be set and automatic adjustable