供应出口玻利维亚2L双工位全自动塑料吹塑机，吹瓶机KAL60II-2L

基本规格

Specifications 单位Units KAL60II系列KAL60IIseries 使用原料MaterialPE.PP.PVC.PA.....制品容积Max container capacityL2模头数Number of dieset1.2.3.4生产能力（空循环Output（Dry Cycle）Pc/hr900×2机器外形尺寸（长×宽×高）Machine dimension（L×W×H）M2.8×2.2×2.4机器质量Total weightton4.3开合模系统Clamping unit 锁模力Clamping forceKN40模板间距Platen opening strokemm128-368模板尺寸Platen sizemm300×320模具尺寸（宽×高）Max mould size（W×H）mm300×320模具厚度Mould thicknissmm153-300动力Power 驱动功率Max driveKW20.5总功率Total powerKW26螺杆风机功率Fan power for screwKW0.14×3气源压力Air pressureMpa0.6气源排量Air consumptionm³/min0.5平均能耗Average energy consumptionKW15挤出系统Extruder unit 螺杆直径Screw diametermm60螺杆长径比Screw L/D ratioL/D24塑化能力Plasticsing capacityKg/hr70螺杆加热段数Number of heating zonezone3螺杆加热功率Extruder heating powerKW6.5挤出电机功率Extruder driving powerKW15模头Die-head 模头加热段数Number of heating zoneZone3模头加热功率Power of die heatingKW1.8挤出口直径Max die pin diametermm100双模头中心距Center distance of double diemm130三模头中心距Center distance of tri-diemm 四模头中心距Center distance of tetra-diemm60/80+基本配置/Basic Equipment开合模系统

Clamping system双平移+高精度线型直线导轨+大梁臂圆柱轴

Double station+High-percision guide+Large arm cylinder axle挤出系统Extruder unit硬齿面减速器+变频器Hard gear box+Inverter模头系统Die system特殊钢中心进料挤出模头ing die with special steel液压系统

Hydraulic system全进口液压阀、密封件+电液比列控制

Hydraulic valve，Seal parts and Proportional control控制系统

Control system进口PLC+进口人机界面+PLC自动温控模块

Import PLC+Human-machine+PLC automatic temperture control model