上海耀澄贸易有限公司
主营产品:
2023年09月23日 19:53
牌号 |
FEP-9475 |
用途级别 |
挤出级 |
厂家(产地) |
美国杜邦 |
DuPont™ Teflon® FEP TE9475
Product Information
Brand
Teflon® is a registered trademark of DuPont for its brand of
fluoropolymer resins, which can only be used when licensed
by DuPont. Customers who wish to use the Teflon® trademark
in connection with DuPont FEP products in approved
applications should contact (800) 262-2745. Without a
license, customers may not identify their product as containing
Teflon®, but may refer to the resin as FEP TE9475.
Description
DuPont™ Teflon® FEP TE9475 is a melt-processable
fluoropolymer resin specifically designed for high-speed
extrusion of thin coatings on small-gauge wires for twistedpair
constructions.
As shown in Table 1, this resin provides the electrical and
mechanical properties needed for low-voltage applications.
In addition, Teflon® FEP TE9475 has a higher melt flow rate
than most other fluoropolymer resins. This permits higher
extrusion speeds and easier processing, making Teflon® FEP
TE9475 a cost-effective alternative for producing thin-wall
extrusions.
Teflon® FEP TE9475 is designed and made to have low
dissipation factor at high frequencies and to have significant
plate-out resistance in melt extrusion. It is suitable as a solid
insulator and as a foamed insulator when used with an appropriate
nucleant in a nitrogen gas injection process.
Teflon® FEP TE9475 possesses a balance of processing and
performance properties, which makes it an excellent choice
for many applications. Like all Teflon® fluoropolymer resins,
Teflon® FEP TE9475 offers an excellent combination of
properties:
• low flammability
• exceptional dielectric properties
• heat resistance
• toughness
• flexibility
• low coefficient of friction
• nonstick characteristics
• negligible moisture absorption
• chemical inertness
• performance at temperature extremes
• weather resistance
联系方式